The heater in the side mirror has worked in the past. I just noticed today that it wasn't working any more. It could have stopped a while ago but wouldn't have been noticed because there was no ice
Speaking of ice, I have a question about the rearview mirror which occasionally displays "ice" instead of the temperature when I start up. The outside temperature is usuall between 0 and +4 celsius.
I do not see a separate fuse for the heaters, so you have power thru the 25 amp breaker. You will, have to pull the panel up or access the mirror connector to trace power to the elements. Not sure which is easier. I have pasted all of the relevant diagrams.
Likely failure modes are open heating element and failed heater switch.
SOURCE: Rearview Mirror Adhesive
The product does work fine, you can try it again. Make absolutely sure that all of the old adhesive has been removed, I use a new, sharp razor to remove the old stuff on both surfaces. Be sure NOT to touch either of the clean areas with your fingers. If you do, take acetone and wipe that part clean. follow the directions and good luck.
SOURCE: i recently purchased some towing
Hi, the door panels need to be removed,there are 3 mounting nuts, and a wiring harness,(if mirrors are power).unhook the wire, take the 3 nuts off, and remove the old mirror.Repeat for the other side,and the mirrors should be functional.Good luck...
89 views
Usually answered in minutes!
same as posted
×