Question about 2007 Pontiac Torrent AWD

1 Answer

Procedures for idle speed relearn for 2007 pontiac torrant

Posted by tropicalc18 on

Ad

1 Answer

Debra Delaney

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Is the free instructions explaining the idle speed relearn for a 2007 pontiac torrent?

Posted on Feb 21, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I adjust the throttle body


The throttle bodies on most newer cars are not adjustable for its idle speed. If the Check Engine Light is on, go to the nearest auto parts store and get them to pull the error codes from your car's computer. Post the codes back here and we can give you a better answer to your question

Mar 22, 2015 | 2007 Toyota Corolla

1 Answer

Replaced abs traction control sensor on 2006 pontiac torrant when i brake fill's like traction control kick's in right before i come to a complete stop make's a grinding sound or some sort


look on the front axles for the ring with teeth look between the teeth for cracks rust forms behind the ring and the rust expands and cracks the ring the crack then sends the wrong speed signal to the brake module

Sep 02, 2012 | 2006 Pontiac Torrent

1 Answer

2003 tahoe how to do a idle speed relearn 5.3


All you do is disconnect the battery NEGATIVE cable for 5 minutes and then reconnect, over the next few miles your system will relearn idle. This will not correct any idle problems such as stalling or erratic idle, this would be caused by other problems many of which WILL NOT SET FAULT CODES.

May 25, 2012 | Chevrolet Tahoe Cars & Trucks

1 Answer

What's the steps to do an idle re-learn on a 2007


Hold the idle at 2000 RPM for 2 minutes then drop it to 1500 for 2 minutes and then 1000 for 2 minutes, then let it return to idle for 5 minutes. Full relearn requires some driving as well, mixed low and highway speed and idle time.

Feb 14, 2012 | 2007 Ford Mustang GT California Special...

1 Answer

Fast idle


Unhook your battery cable for ten minutes.Reconnect it and let the car idle for five minutes,then drive it normally and it might relearn to idle again at correct speed.This is just something I would try,as it can prove to be a very simple fix. don-ohio (:^)

Nov 15, 2011 | 1997 Pontiac Grand Am

1 Answer

Hi i have a code reading P0506 for a 06 GMC Envoy XL any recomondations


{: ) DTC P0506 Idle Speed Low
The usual cause is an excessive carbon build-up on the throttle body. If this is the case, I suggest you have your throttle body cleaned and perform an idle relearn procedure using a GM scan tool. The idle relearn or reset procedure is very important, otherwise this code may still remain even after a throttle body clean.
In a similar fashion, if the ECM/PCM (engine control module) of a high mileage vehicle is replaced and/or reprogrammed without performing the Throttle/Idle Learn procedure, the ECM/PCM may no longer compensate for existing carbon build up in the throttle body, causing it to return with a similar concern as well as DTCs P0121, P0506, and/or P0507.
There are other conditions that can also affect or reduce idle speed by increasing engine load like incorrect torque converter clutch (TCC) operation, accessories that require additional torque to operate, restricted exhaust, and mechanical conditions that limit engine speed.

Aug 02, 2011 | 2006 GMC Envoy

1 Answer

Rpms Too Low


the idle speed is controlled through the on board fuel injection control module (known as the PCM), even if u raise the idle at the throttle body the computer will slow it back down, however there is a problem that causes slow idle, do the following procedure to correct the slow idle issue, follow it exactly.

Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Apr 07, 2009 | Pontiac Grand Prix Cars & Trucks

2 Answers

How do i reprogram the computer on my 2002 xl7


Try this relearn procedure hopefully it will help

Vehicles equipped with engine or transmission computers may require a relearn procedure after the vehicle battery is disconnected. Many vehicle computers memorize and store vehicle operation patterns for optimum driveability and performance. When the vehicle battery is disconnected, this memory is lost. The computer will use default data until new data from each key start is stored. As the computer memorizes vehicle operation for each new key start, driveability is restored. Vehicle computers may memorize vehicles operation patterns for 40 or more key starts. Customers often complain of driveability problems during the relearn stage because the vehicle acts differently then before being serviced. Depending on the type of vehicle and how it is equipped, the following complaints (driveability problems) may exist:

Harsh Or Poor Shift Quality
Rough Or Unstable Idle
Hesitation Or Stumble
Rich Or Lean Running
Poor Fuel Mileage

These symptoms and complaints should disappear after a number of drive cycles have been memorized. To reduce the possibility of complaints, after any service which requires battery power to be disconnected, vehicle should be road tested.

Vehicle Preparation

Ensure all components are connected. Ensure transmission fluid level is correct. Warm engine to normal operating temperature. If vehicle has been repaired, perform KOEO and Continuous Memory Code Self-Test and ensure fault codes are not present.

Computer Relearn Procedures

Idle Relearn Procedure

Place automatic transmission in Park or manual transmission in Neutral position. Ensure the emergency brake has been set and all accessories are turned off. Start engine and bring to normal operating temperature. Allow manual transmission vehicle to idle in Neutral for one minute. Allow automatic transmission to idle in Neutral for one minute and then to idle in Drive for one minute. Once initial relearn is complete, process will be completed during normal driving. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (AOD-E, AXOD & AXOD-E TRANSAXLES)

With transmission gear selector in Overdrive, moderately accelerate vehicle to 50 MPH for a minimum of 15 seconds. Transmission should be in 4th gear. While holding speed steady, lightly apply and release brake for about 5 seconds. Stop and park vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Drive Cycle Test (E4OD)

With transmission gear selector in Drive, press Overdrive Cancel Switch (LED should light). Moderately accelerate vehicle to 40 MPH for a minimum of 15 seconds (30 seconds above 4000-ft. elevation) Transmission should be in 3rd gear. While holding speed steady, press Overdrive Cancel Switch (LED should go off) and accelerate from 40 MPH to 50 MPH. Transmission should shift from 3rd gear to 4th gear. Hold speed steady for 15 seconds. While holding speed steady, lightly apply and release brakes enough to turn brake lights on. Maintain 50 MPH for about 5 seconds. Stop vehicle for a minimum of 20 seconds with transmission gear selector in Drive. Repeat procedure 5 times. Always complete the procedure before returning the vehicle to the customer.

Mar 26, 2009 | 1998 Lincoln Mark VIII

Not finding what you are looking for?
2007 Pontiac Torrent AWD Logo

Related Topics:

1,124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...