SOURCE: Crank sensor and camshaft sensor
The crank sensor is in the top of bell housing of the transmission towards the back of the engine compartment. The cam sensor is built into the distributor.
SOURCE: knock sensor 1996 v6 3.3 nissan pathfinder
The Crankshaft Position Sensor is located:
Under hood, driver side, front engine area, mounted rear of crankshaft pulley
The Knock Sensor is located:
Under hood, center, front engine area, below intake manifold, mounted on block
SOURCE: crank shaft position sensor located hyundai sonta 2004 v6
On a 2.7L it is located above and to the right of the starter. You will have remove the starter heat shield to gain access to it.
SOURCE: 91 acura legend will not start
Take off the hose to the throttle body and look for any obstructions. This has been know to cause performance issues similar to those described
871 views
Usually answered in minutes!
×