I have a 2500hd silverado 02 6.0L light above bumper I think its a driving light but my driving lights are my low beam head lights how do I get them to come on?
Okay those lights are called your driving lights. they only come on during the day, when headlights are off, they are for safety. i know this would drive me crazy, a customer would come in and say i have a light out and i would check and all was fine. the way it works is during the day, headlights off and truck must be in drive,
you will need some one inside holding the brake and put in drive with headlights off for you to see them and see if they need bulbs. let me know the outcome .good day
SOURCE: INOP low beam and high beams
The problem is the headlight switch itself - it's one of the most common failures on these cars. The part, brand-new, is about $158 from ECSTuning.com. Replacing it involves removing the airbag and steering wheel - not difficult but a little nerve-wracking due to the power of the airbag.
If this is something you want to tackle on your own, reply back here and I can give you a step-by-step on doing the work yourself. Or you can go to a shop/dealer and just have them do it. They'll probably charge you at least two hours' labor, even though it's a 40 minute job. Let me know what you would like to do.
SOURCE: low beam head lights won't work
Check your relay switches under the hood fuse box. They should be a light grey from factory, they are about 1 x 1" in size and there are a few in there. Pull one out at a time and if they look brownish or yellowing replace. Go to Napa or Auto Zone for $15.99 a peice that most likely will fix it.
SOURCE: Low Beam Headlights don't work anymore
Just went through the same thing. Replaced the bulbs with expensive ones about 3 months ago, both low's went out together. I looked at all fuses relays etc to no avail. Called dealership to ask about a relay or something and was told they go out together for some reason. Sure enough I replaced them yet again and they were fine. WTF??????
SOURCE: how to replace 2009 chevy silverado 2500hd rear
Unless they change everything, the bumper just bolys on. Fisconnect the tow plug and what ever else and take the bolts out of the brackets attached to the frame, Good Luck, Ned-
108 views
Usually answered in minutes!
×