1994 Honda Prelude Logo

Related Topics:

Anonymous Posted on Dec 24, 2012

Grinding sound at low rpm

Intermittent sound of metal on metal, scraping or grinding, medium pitch ( sounds like sheet metal on metal) seems to come from just inside one wheel or the other and higher up than the axle occurs in 2nd gear at about 2000 rpm or less in 3rd gear at about 2500 rpm or less

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on May 12, 2011

SOURCE: Shifting problem

jus re-built my transmission, jus before the gear changes the engine accelerate about 200 rpm

Ad

Anonymous

  • 125 Answers
  • Posted on Feb 04, 2009

SOURCE: 98 Civic Auto Trans Slippage

you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas

Jonah Oneal

  • 14092 Answers
  • Posted on Apr 11, 2009

SOURCE: my 92 honda accord will not go into 1st 3rd or 5th gear

check shift fork adjustment. make sure you bleed the slave cylinder.also check shift cable adjustment.

Anonymous

  • 407 Answers
  • Posted on Apr 28, 2009

SOURCE: High pitch whirring noise (jet like taking off to space noise) coming from engine/transmission when i increase my RPMs with gas pedal.

check for vacuum leak

Anonymous

  • 1623 Answers
  • Posted on Jul 23, 2009

SOURCE: car makes a high-pitched squealing noise only

Check the belts for slippage and wear. If the tension is not correct, the belts will slip and create a "squealing" noise...moreso at higher rpms or on acceleration as you mentioned....That is the most common cause for a "squeel". I would check that first.
Good luck...i hope this helps fixya up.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Loud brake noise in 97 buick lesabre

When you had the drums off, did you inspect the shoes for excessive wear? And How do the drums look? Are they grooved? Can you be more specific about the loud noise. Does it sound like a grinding noise, or a screeching or pulsating noise. Is it lower pitch or high pitch?
0helpful
1answer

2007 Cadillac escalade makes loud noise when starting the car. Sounds like the air suspension on a navigator when it adjusts, but louder. Lasts maybe 20 seconds. Happened 3-4 times within the year. Any...

Try to better describe the noise.
Is it a
scraping of metal
grinding / rubbing
high pitched shriek like a drive belt slipping
Is it
underneath the body
under the hood
in the aircon
when you pull into gear
when you pull away
etc
Do a bit of detective work and come back.
0helpful
1answer

2008 land rover lr3 making loud meal scraping sound

from where is the sound coming from, and is it constant or intermittent?
0helpful
1answer

2005 Ford Explorer is making a grinding noise

I had some issues with my 2005 explorer left rear. It was making a creepy old door sound at low speeds and then a high pitched whisel at high speeds. That turned out to be a broken wheel bearing and had it replaced. Note each wheel has two wheel bearings. After that a new noise developed that sounded like metal scraping/ grinding metal. It end up being the brake dust cover got bent when they replaced the bearing and it was rubbing something, the fix for that was bending it so it didn't rub. I hope this helps.
0helpful
3answers

Front right turn dragging/grinding noise

Possibly a broken wheel bearing. Have a mechanic check it out.
1helpful
2answers

Brake problems...help

Do you have an ABS light on on the dash? Is it a grinding like metal to metal or a growling like an electric motor working? If its metal to metal its time for a brake job, if it's the electric sound then you have an ABS concern. Sounds like an ABS issue with it being intermittent, should get the computer scanned if you have a light on.
1helpful
1answer

Have 93 Chevy G 30 Have a High pitch whine that changes with rpm

This could be anything from the pump in the transmission to the alternator bearings/bushings to the power steering pump. Could be an idler pulley bearing, but I doubt it.
Hint: If the noise is very high-pitched, check the alternator. If it is a lower, medium-high-pitch sound that changes some when you turn the wheels, check the power steering pump. If it is almost like a moan or a "Whooo" sound, that's the transmission pump.
1helpful
1answer

Car makes a metal grinding noise at idle

sew them. something is stuck did you turn or anything in the wash?
7helpful
1answer

Rattling Coming from Engine At low RPM (stopped) and when accl.

If this sounds like a tin can rattle it is likely a loose heat shield on top of the catalytic converter. They come loose after time and corrosion take their toll.
0helpful
1answer

Grinding sound in brakes

disks or drums ,do you have a warped disk,may need to machine them
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...