2001 chrysler concorde lxi stalls with no warning when slowing down, starts right back up

SOURCE: 1997 Chrysler Concorde just stopped running while

Three things make the engine run. Air, fuel, spark. One or more of those is not present and the engine stops.pull a plug wire off, put a screwdriver in the end, have a friend turn over the engine while u hold the screwdriver near a metal part of the engine(dont touch the wire or screwdriver) look to see if there is a blueish white spark. If no then u have to trouble shoot the ignition. if yes... take off the air filter, spray some starter fluid in the air entrance and try to start. If it starts u have a fuel problem.
If the car has high mileage the timing belt could have broke

SOURCE: 1998 Chrysler Concorde just stopped running while

ignition module or a failed computer

SOURCE: 2001 Chrysler Concorde LXI randomly stalling while

One suggestion:
Speed sensor failure.

Info:
Some of the classic symptoms, stalling at dead stops. failure to auto lock doors. poor fuel economy. Failure to go to overdrive.


Recommendation:
Go to your local parts store and run the failure codes.

Shop notes:
Your ECU thinks that the engine is running with out moving, During slow down the engine steps down the idle to match ground speed and as a result the engine will not stall. At present it goes directly to idle and stalls due to drag on motor.
Hope this tip helps.

R/
David

SOURCE: 1997 Chrysler Concorde LXI. Radio works its just

Try disconnecting the battery for five minutes and then reconnect. This may reset the memory in the radio.

Duane Wong

• 6826 Answers
• Posted on Nov 04, 2011

SOURCE: problems with 2001 Chrysler concord LXi: Getting

If there is a driveability problem then I would worry about it. But, if there is a code saying there is a fault transmitted to the PCM but there is no other explanation, it could be a minor fault that doesn't require tearing the transmission down and rebuilding just yet.