I am trying to change light bulbs on my dodge avenger 2010 but I can't get the assembly off the car, can you show me the correct way
After you remove the screws all you have to do is pull out firmly and it will pop out...there are clips that hold it in..sometimes take a good yank to get them free
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
SOURCE: how to change the bulb in a 2001 dodge ram 2500 brake light
IS IT A FRONT OR BACK BULB/FRONT LIFT THE HOOD AND TURN OUT THE BULB HOLDER/REAR UNSCREW THE TAIL LIGHT ASSEMBLY.
SOURCE: How to replace fog lights on 1998 Dodge Avenger ES
you need to take off the buttom shields and then you should be able to get to the fog lights
SOURCE: Replace Bulbs in Headlight. 2008 Dodge Avenger
there is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt.
hope that helps, it is stupid
SOURCE: How to change a headlight bulb on a 1999 dodge avenger?
under the hood in behind the head light is where the bulb goes dont touch the glass on your new bulb
SOURCE: i have a 1999 dodge caravan. Passenger sign turn
Sounds like the relay is burning out. When the lights stop flashing does the indicator on the dash light up and stay on and/or does the exterior lights light up and stay on? If the indicator light is staying on then you have a wiring problem to the lights or you have the wrong bulb/ bulbs. If the exterior lights stay on it is a bad relay or power to the relay.
375 views
Usually answered in minutes!
×