Brake lights work and blinkers work, but rear lights won't come on when driving. My license plate lights also do not work so the guy tried to replace them but they won't work either. Not sure if the two problems are connected or not.
Have you check for blowin fuses?
SOURCE: Mazda 626 electrical problem
hello do you have a tow bar and trailer plug .if so check that first.get back if you dont .we can go from there
SOURCE: no rear lights.
check power on rear light positive terminal.rear light fuses,or ground,..lee
SOURCE: 1999 Mazda 626 no rear lights!
fuse or wire harness, checked the voltage present in the fittings? Switch on before checking.
you get 12 volts more or less?
SOURCE: My Mazda 626 Wont go into Drive
Sounds like you have lost the transmission. There are bands that clamp down to lock the transmission into the gear you want. They are controlled by a hydrolic unit located in the trans. The first thing I would do is have a shop pull the trans oil pan and see if it is full of chips of metal. If so you definately have a problem. At the same time they can look at the bands and see if one of them is broken. another cause would be that metal has gotten into the hydrolic valve body and frozen the drive band portion so it will not function. You may also get lucky and have it be an internal adjustment of the drive band. Good Luck, RAC
SOURCE: Cruise control problem
The cruise control is terminated by the brake lamp circuit, Check the brake, tail lamp for water or a short. Your turn signals are on a different circuit. Check the bulb sockets closely for corrosion. Failing this check connectors for the tail lights for possible water penetration, or loose connections.
Hope this ia of some help
Ed
149 views
Usually answered in minutes!
×