Question about Cars & Trucks
If you have the 2.2 2.3 2.4 engines oil dip stick location on passenger side front engine down below upper radiator hose below the throttle body resonator.
Posted on Nov 24, 2012
SOURCE: dip stick tubing
if the end that is on the bottom of the new tubing is smooth then the old one should twist out with a bit of force no particular direction to pull off though just twisting
Posted on Jan 15, 2009
If it has a 4T40 trans it dosn't have one you have to pull the 7/16 plug out by the passenger axle the fill it up by the red or black cap on top of the trans til it runs out the plug hole on the bottom. I know thanx GM hope this helps.
Posted on Jul 25, 2010
SOURCE: 2003 NISSAN SENTRA 1.8 GXE
the dipstick tube is fasten by a bolt either at the bottom or in the middle of the tube, if it was at the middle, I don't think it would have broken. Look at the base of the dipstick tube where it goes into the engine block, there should be a bolt, use a 10 mm. socket and a long extension to remove it., then pull the tube out.
I believe the dipstick tube is bent, that's why the dipstick can't go all the way into the oil pan.
Good Luck!! Don't forget.to rate this post!!
Posted on Aug 22, 2010
Tips for a great answer:
Feb 17, 2018 | Cars & Trucks
Feb 24, 2015 | 2004 Pontiac Grand Prix
Jun 17, 2012 | Cars & Trucks
May 14, 2010 | Cars & Trucks
May 12, 2010 | 2001 Chevrolet Cavalier
Jan 20, 2010 | 2002 Chevrolet Tahoe
Apr 26, 2009 | 1995 Chevrolet Cavalier
Apr 20, 2009 | 1992 Chevrolet Cavalier
Feb 15, 2009 | 2004 Chevrolet Cavalier
Jan 19, 2021 | Buick Cars & Trucks
181 people viewed this question
Usually answered in minutes!