Question about Cars & Trucks

1 Answer

No power to windows

Jump hot to windows they will go up or down fuses are good

Posted by Martin Witt on


1 Answer


There are no relays in window circuits

Didn't see you Howard,be cool

Posted on Nov 24, 2012

  • Howard Wied Nov 24, 2012

    Since when isn,t there relays for Power window circut, My 68 GTO Judge Uses a relay in the power window circuts ,ENd all so my 2000 Hyundai Tiberon has a relay also for the power windows ,Plus a circut breaker, End 2 fuses allso for them,

  • Anonymous Nov 24, 2012

    Yes in the 1960 & 70's & circuit breakers I agree Didn't know asian cars had them or at least yours



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2006 Ford Escape 2.3l no crank no start no power to dashboard

Make sure battery has a full charge and battery connections all good. Check fusible links where applicable. Basically, you check voltage and grounds for the system. Check the fuses in the fuse box for voltage, use a test light. Some fuses are hot all the time, some hot with the key on. If the problem is ignition feed, meaning it goes hot with the key on, you may have to check feed to and from ignition switch. I can only help with testing.

Apr 05, 2018 | Ford Cars & Trucks

1 Answer

Looking for wiring diagram for drivers side window switch for a proton savvy 2006 my window goes down not .wanting to by pass switch via linking the correct connections on cable plug .then if it works...

Not familiar with this car, but first you have to find the power wire to the switch-that will be one end of your jumper wire. Use a test light clipped to ground, turn key to on, and probe all the wire cavities till you find the hot wire to switch. Now pull out on the electrical connector and see if you can see the two wires going down to driver's door motor. Then see where they connect to the connector. When you touch the jumper wire end to one, it will be for either up or down, and the other motor wire when connected to hot jumper wire will be the opposite, either down or up.
If window is all the way up, jumping hot to up side will make no noise, and cause nothing. So you try the other motor wire to see if motor makes window go down. See, you have to jump hot wire to both to verify the motor works or not.

Oct 14, 2017 | Proton Cars & Trucks

1 Answer

After getting a jump start my interior lights, radio and clock stopped working

Make sure battery has a full charge and battery connections all good. at the moment, I don't know if you have fusible links? Check your charging system. If battery is down we can't do any testing.
If the radio loses battery voltage, it may go into theft lock? As far as your interior lamps, I'd have to check the wiring diagrams. Any component or system that is fuse protected, not only check the fuse, check the fuse circuit for voltage, use a test lite. Some fuses are hot all the time, some go hot with key on.
Some vehicles if battery voltage is lost, there may be some modules that have to relearn or be reprogrammed?
I need year--make--model.

Nov 01, 2016 | Cars & Trucks

1 Answer

My windows wont go up on my 2002BMW745I

Personally I'd start with checking the fuse panel,on MBnz there're fuses that handle power to l/f&r/rear,r/f&l/rear. If fuses are good &/or power is going through but no action from the window motors then I'd remove one door panel at a time to see where the electrical connections hook up to the window motors and see if motor receives power but no action then could be obstruction on the rails?. If no power to the motor,I'd connect direct power to the exposed motor to see if motor is good. I'd try starting from the fuse panel FIRST!. Hope this helps. Alberto

Jan 31, 2014 | BMW 750 Cars & Trucks

1 Answer

Power windows wont work.Fuse good

The switch or the motor is out. Remove the wire from the motor and hit the switch. If no voltage registers on a meter jump a hot wire the motor if it works then the switch is out. If nothing then the motor is out.

Jul 19, 2010 | 1999 Buick Regal

1 Answer

All of my windows works except the driver side window. the motor feels hot, but it will not roll down the window. The fuse is good. The window will not roll down.

using 12 volt test light back probe motor connector work switch up and down light should illuminate both terminals if so hold window button down small hammer tap directly on motor

Sep 28, 2009 | 2000 Dodge Grand Caravan

1 Answer

Rear electric window not working and the window is partially down. Is there a manual way to close the window?

did you check the fuses 1 st the window switch may be at fault but you should ck the fuses first or a test light to ensure power to the switch and to the motor often the wires going between the door jamb break just from the bending from opening and closing the door you should be able to jump { hot wire the motor to the window if you are confident in doing so very common issue but check the fuses first

Sep 07, 2009 | 2001 Audi A6

1 Answer

Power windows won't go down

If the fuse is getting hot and not blowing you have a high resistance short .Maybe in one of the window motors.


Jul 13, 2008 | 1989 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23424 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides