Every time i try to put on my high beam i have to hold lever if i let go the high beam goes off.
Have you tried moving the lever in the opposite direction? Some cars have the lever set so when someone is coming towards you with their high beams you can tap the lever in the direction you are moving it to flash the oncoming car to lower their high beams and the opposite direction puts them on high until you turn them off. Just a thought.
SOURCE: DRL and High Beam do not work right on Honda Accord EX 1998
Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.
SOURCE: my 2000 monte carlos has
replace the relay in the fuse box located in the engine compartment near the battery.
Robert
Please take a moment to rate this solution thanks
SOURCE: headlights on high beam all the time
the wiring is backwords switch them around and that should do it
SOURCE: headlights don't work, low or high beam-
Light switch bad or check all head lightrelays . 2 dim ones and 2 high beam ones. one is bad.
SOURCE: I have a 1999 ford explorer sport and low beams not workiing.
replace driver module relay .it controls the low beam lights.
220 views
Usually answered in minutes!
×