Does a slim jim work to open my door?
Easier to show you the video.
https://www.youtube.com/watch?v=ci3q4HYrzm0
Yes. Easiest way is to use 2 wedges and place between rubber strip and glass. The space you created is easier than leaving it tight and unmaneuverable. If you have a led flashlight with a flex neck, you can now look at the mechanism and get it done quickly.
Align the slim jim with the lock and push it downwards towards the keyhole.When you see the lock start to move, pull the slim jim upward slowly until the door unlocks.
SOURCE: how to use slim jim
ok well first off do you know anyone that has a truck close to the same year if so try using there key it should work to open your door and on how to use a slim jim depends on if you have power locks or not if so it's a bit harder than if you don't but you put it between the window and the rubber seal and slip it under the door locking bar ether up and forword or back if its a manual lock and if not you haft to move the slim about 2 to 5 inches from the lock and do the same good luck
SOURCE: locked out of 96 chevy cavalier
You can use a wire hanger with a hook bent onto the end fairly easily if you slide it down the window and try to feel around to hook onto the lock mechanism. It may take a bit of patience, but I got into my 2000 with not too much trouble. Then do what I did immediately afterwards - get another key cut to keep in your wallet...
SOURCE: lock keys in 01 chevy s10. will a slim jim
not unless your really good at it, get a wooden wedge and pry the top corner of your door open enough to get a wire in to pop the lock. it wont hurt your door
SOURCE: locked keys in a chevy colorado, manual locks can
yes it can be opened with a slim jim, but it is not that easy, u really need to know where to put the toll and how to move it, a locksmith can do it quickly
SOURCE: how to unlock car door with electric locks with
You will need to carefully pry the door back and hit the unlock button with a coat hanger.
Use nylon or other soft wedges to hold the gap while fishing the hanger through.
Easier than most methods.
7,755 views
Usually answered in minutes!
×