Cars & Trucks Logo

Related Topics:

Posted on Jan 04, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Audi A4 2003 Alarm Problem

My alarm keeps going off. But the hazard light dont flash just the alarm horn. I try and use the key fob to stop but dosn't when I turn the key will stop for about a min then go off again. Please can someone advise what the problem is.

Thanks

  • nanthor Jan 19, 2009

    My TT alarm goes off for no reason and there is a "clicking" like turn signals while I drive it. This all began shortly after an oil change where the skid plate was removed and replaced. I'm wondering if there is a wire bundle near the skid plate that could be pinched? Any advice? Thanks, Bob.

×

2 Answers

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Expert 92 Answers
  • Posted on Nov 16, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jan 02, 2009
Answers
92
Questions
1
Helped
22103
Points
204

Hi All,
I have an Audi A6 Avant 1.9TDI Limited Edition 53 plate. While doing diagnostic checks I must have hit or changed something. When I finished and locked the car I noticed that my alarm did not activate ie indicators did not flash and there is no red flashing lights by the door locks as before. Can anyone please tell me how to re-enable the alarm. There must be an easy way of doing this without going to an Audi dealer...

Many Thanks in advance.

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Sep 07, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Sep 07, 2009
Answers
7
Questions
0
Helped
3449
Points
22

There is a few things to do check the door switches that control dome lights, check wire down by the skid plate when you get oil changed there is a sensor for the starter there if it is stolen the alarm will go off or just take a BAT and BEAT the living **** out of your horn and call it good like I am going to. I hope this helped or will help I recommend an aluminum bat vrs. wood

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I assume the factory alarm was somehow bypassed when they installed the remote start is there a way I can make the factory alarm work when the doors are opened without key,?

To arm content theft alarm.
1. Open the door.
2. Lock the door with the power door lock switch or
the remote keyless entry transmitter. The
SECURITY light should flash.
3. Close all doors. The SECURITY light should go off
after approximately 30 seconds. The alarm is not
armed until the SECURITY light goes off.

If a locked door is opened without the key or the remote keyless entry transmitter, the alarm will go off. The headlamps and parking lamps will flash for two minutes, and the horn will sound for 30 seconds, then will turn off to save the battery power.
1helpful
1answer

Changed my battery in my 2006 dodge Durango, now the factory alarm lights keep flashing. Don't have key fob , just a regular key. Trying to stop the lights from flashing.

Not sure if this will work, but try this:
Open your car from the driverside door, if the alarm starts flashing, go to the passengerside door and use the key to unlock it. That should reset your factory alarm. GL
0helpful
1answer

Hazard lights flashing and alarm sounding. How do I stop these?

Every car brand and model has its procedure to stop the flashing light and alarm sounding.
But still the common procedure is Make sure boot and bonnet are closed properly.

It can also be a switch, but check your alarm by locking yourself inside the car, and then press the close button on the key 2 times repeatedly until the lock control on the door doesn't make anything. Then open the door by pushing the lever or open the hood . If the horn sounds and the lights blink your alarm is ok , if only the lights blink you should take it to dealer. You can stop the hazard lights and horn sound by pressing the unlock button on the key.
0helpful
2answers

My alarm does not make any sound,the hazards flash though on my 2005 jeep Cherokee Liberty

If it did ever work for you, then the problem should be the horn itself, the wiring to the horn, or the sensor/computer that tells the horn to blow.
Otherwise, the whole system may be defective.
God bless your efforts.
0helpful
1answer

Audi TT alarm won't quit going off

Get out of Car and use the key to lock Drivers door and then use key to Unlock drivers door, You someytimes have a switch built into the door lock it self.. Good luck
2helpful
2answers

2003 Audi A4 Cabriolet alarm problem. The fobs (both) keep losing sync with the car. The fobs have new batteries. The hazard warning lamp switch on the dash is illuminated constantly, and I believe the...

unlock the car with the key and hold the key over for 30 secs,(the windows will go down) then lock the car/hold key over for 30 secs,(the windows will go up). wait 30 secs then press/hold down the unlock button on the key fob,this will resyncronise the alarm/key fobs.
0helpful
2answers

Hazard lights flashing and remote fobs not working only manual key open and locking doors Audi 2003 a4 sport 19tdi

replace batteries in remotes,then with key unlock car/hold key over windows go down,wait 20 secs,then lock/hold key over,windows go up,wait 20secs, then using remote press/hold down the unlock button for 30 secs.you have just reset the alarm/immobiliser.if remotes/keys dont work after this,then take it to a dealer for a computer/key reset.
0helpful
1answer

While driving my hazard lights keep going off at will what should i do ? The central locking unit is in situ but the there is no actual alarm and although you press the key and the indicator lights flash...

a hazard fuse is big and round mainly silver in color usually under the steering wheel or in the glove-box or on the side of the dash when you open the door
0helpful
1answer

2001 TA WS6 - Horn and key fob not working

Horn problem is either bad horns or failed clockspring behind steering wheel which is the connection for the airbag and horn buttons.
Not finding what you are looking for?

1,645 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...