A lot of times the mechanic try to fix the gear box, because they said it the gear problem that's why the light went on. They can fix it for a while but after a 20 minutes drive, same problem will appear. Can you tell me your opinion and how to turn off the light?
You can take a obd2 code reader to turn off the light.
--------
OBD2 code reader
SOURCE: Started to drive car the
i would check with your local wrecking yard. i saw one on ebay for 825.00 not including shipping.
SOURCE: engine shudders and dies trying to go from a red light
The engine has an electronic module where the spark plug wires connect to. Replace this and you will see the difference. Once this module heats up it will malfunction. After cooling down the car will start up again. hope this helps.
SOURCE: have a mazda 323 2001 astina it is a manual gear
Sounds like oil on the clutch plate lining, burned or glazed facings. Could be worn or loose engine or transmission mounts. Sometimes it is worn splines on clutch plat hub or a warped pressure plate or flywheel.
Testimonial: "thank you at lease we now have a place to start to fix this problem. You have been extremely helpful"
SOURCE: 2000 mazda 626 check engine light went on . code
probley not egr valve it probley egr control solenoid or wiring
SOURCE: Engine Light off & on // On hghway driving @
Have you got your car scanned?If not,then i advise to get it scanned at car diagnosis center.as you mentioned that engine light gets on/off.So this engine light flashes when the computer(ecu) in the car notices any kind of problem.At car diagnosis center they scan the car and give you the error code as per the error code you will get the exact faulty part which is causing the problem.At www.autozone.com its free to get car scanned.Or if in case your regular car mechanics have the car scanning tool then ask them to get it scanned for you.This will help.
Thanks.Helpmech.
176 views
Usually answered in minutes!
×