Question about 1999 Jeep Grand Cherokee
Plenty of causes. Plugs, valves. rings, numerous electronic/electrical faults. Diagnose vehicle and eliminate problems one by one.
Posted on Nov 01, 2012
Check the fuses under the dash on the drivers side, next to the steering column. There should be a fuse puller on the fuse box door. Also a chart of which fuses at what so you can go to the proper fuse. Good luck, Please let me know if this is the solution to your problem.
Posted on Jun 01, 2009
SOURCE: serpintine belt
This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.
Posted on Jan 10, 2009
Trouble Code: P0113 (4.0L L6 VIN S Auto)
IAT Sensor Circuit High Input Print this code data Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Check with ignition on or engine running; battery voltage more than 10v; The PCM detected the IAT Sensor input was over 4.90v (exc. Dakota, Durango, Ram) or 4.98v (Dakota, Durango, Ram) for 3 seconds.
Posted on Dec 01, 2009
P0303 Cylinder 3 mis-fire Possible causes misfire does not return,defective Camshaft Position (cmp)or CKP sensor,vacuum leak,defective ignition system.
Posted on Dec 12, 2009
Tips for a great answer:
Oct 22, 2015 | Cars & Trucks
Feb 01, 2013 | Cars & Trucks
May 28, 2010 | 1998 Jeep Grand Cherokee
May 20, 2010 | 1994 Jeep Grand Cherokee
May 12, 2010 | 1996 Jeep Grand Cherokee
Apr 18, 2010 | 1997 Jeep Grand Cherokee
Sep 30, 2009 | 2000 Jeep Grand Cherokee
668 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: