Putting a performance chip on an 1999 dodge ram 5.9L 1500. cant find the IAT sensor.
The IAT is on the intake manifold passenger side front with a two wire connector. It is right below the Breather cover ,corner where inlet tube from fender inters the cover.
SOURCE: cant find the iat sensor on 91 s10
The IAT or MAT sensor (as equipped), is a thermistor (resistor which changes value based on temperature) mounted either in the air intake snorkel or the manifold (depending on the application).
SOURCE: iat sensor
Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.
Hope this helps you out
SOURCE: location of iat sensor on 1999 dodge ram 1500
temp charge sensor is located on the air box, or tube leading to the throtlebody.
SOURCE: were is the IAT sensor located on my 1999 dodge
This should be the only sensor located on the Air Filter casing/intake. It measures the Intake Ambient Air Temperature and sends that information to the PCM/IPM to gauge the correct Air and Fuel mixture to have the Engine start and run.
1 - LEFT SIDE OF THROTTLE BODY
2 - ELEC. CONNECT.
3 - IAT SENSOR
4 - RELEASE TAB
299 views
Usually answered in minutes!
×