2003 Pontiac Aztek Logo
Anonymous Posted on Oct 18, 2012

I can't open the hood of my 2003 Pontiac Aztek.

The hood release works, it pops like normal, the hood comes up about an inch, but it's still latched in there. I felt around under there and couldn't find a release. Am I dumb?

1 Answer

Bill Chestnut

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 155 Answers
  • Posted on Oct 18, 2012
Bill Chestnut
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Dec 10, 2010
Answers
155
Questions
0
Helped
40334
Points
404

The release is under there - get a flashlight and look for a metal piece sticking into the hood. It should move either left, right, forward, or back to release from the hood. You really need to get down below the hood to find it.

Testimonial: "Yeah, I found it... It's just left of the center of the hood, and it was kinda hard to reach. It goes left to right. Thank you, sir!"

  • Anonymous Oct 19, 2012

    Thank you! It's just to the left of the center of the hood and goes left to right. It's kinda hard to reach, too.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2008 Pontiac Vibe battery is dead. Can't pop hood with hood release to even get to battery. How else can we get the hood opened?

What is wrong with hood release?
Sometimes I use vice-grips on hood release cable, have a helper standing at the end of the hood. At the same time you pull the release cable, have the helper pop the hood in area of release mechanism with palm of hand, sometimes that works to open hood. If you get it up, lube everything.
Some makes and models, I can remove front grille and reach the release mechanism. Don't know about your vehicle?
tip

How to find a speed sensor 2003 Aztek 3.4 L for dummies like me

1st if you open the hood of your Aztec. If you look to your left find your serpentine belt and follow it from front to back In order you have your water pump, next your Power steering pump. On the backside of your power steering pump you have two metal lines that run down behind the serpentine belt toward front passenger side tire. Best way to find it. pull tire off stick your pointer finger on either line follow that line as it goes toward the back of the motor or transfer case. Its the only Sensor with in a inch of those lines the 1st 12 inch in under the fender. If by chance your a rookie like me and you take on a Head gasket. Pay attention when assembling the steering pump back to its carriage.. Double and triple check that the lines don't pinch the cheap pig tail assembly that can create havoc on a couple things. 1st The speedometer wont work, 2 ND while driving done the road your transmission will not shift up with your speed and rpm. Again I'm a rookie but have commonsense...
on Oct 22, 2013 • 2003 Pontiac Aztek
0helpful
1answer

How to reset change oil light on a 2003 pontiac aztek

easiest way is to turn key on to just dash lights n floor gas pedal n release 3 times real fast
0helpful
1answer

HELP!! 1992 buick lesabre Hood release cable snapped. no way to get hood open..

You may need a professional to get this hood open, and it will likely need to be on a car lift. Try this if you are handy, try removing the driver side fender well liner for access to the latch.
1helpful
1answer

Can't open glove box in my 2003 Aztek

I have an 03 Aztek and my latch just broke the trick to getting it open is a screwdriver or a little hook of some sort... Pull the handle back and look up under u will see a metal bar on the right side. get a grip of that and pull/pry a little bit and it will open. Once open there are 2 philips head screws holding it in and that's it
0helpful
2answers

Bonnet stuck down

If the inside latch won't work, you'll have to reach up from underneath the hood to pull the lever over to open. Usually a flatblade screwdriver will help. The latch lever has to move towards driver's side to open.
0helpful
1answer

Where are the vacuum lines located on a 2003 pontiac aztec

under the hood , under the dash are the most obvious ones.
Open the hood and look around for small black hoses... they will ultimately lead to the intake of the engine (where vacuum is created)
Not finding what you are looking for?

557 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...