I have replaced the battery in my 2008 key fob, but still no response on ingnition, door locks etc... the red light on the fob flashes, but nothing will operate... do I have to reprogram? does the tool Godiag Auto Car Key Programmer T300+ New Release can help me? the link is http://www.xcardiag.com/wholesale/godiag-auto-car-key-programmer-t300-plus.html
Hi, Read THIS POST. Also, did you check the Owner's Manual?
Td
SOURCE: how to activate alarm 2001 bmw 325ix
The flashing light does not mean you have an alarm. They were not standard in the 3-series.
You can get one installed or if you want the dealer can program the lights to flash when locking and unlocking doors even with out alarm. This is called "acknowledgement without DWA"
SOURCE: Key fob lock / unlock and int cen/locking button does not work
The key may have lost it programing. This link tells you how to reprogram the key. Good luck.
SOURCE: 1995 BMW 525i. Car will not start or turn over.
I had the same problem, after having the car towed to four Seasons, it was discovered that the electrical portion of the ignition switch was defective. Works like a charm. Part number 61 32 8 356 026 Hope this will help.
476 views
Usually answered in minutes!
×