SOURCE: 2002 Pontiac Grand Prix Thermostat
as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!
SOURCE: aux input location
Though I'm sure there is an AUX button on the radio, there isn't actually an auxillary port on a 2007 Grand Prix stock radio.I'm sorry to say, but you would have to get an aftermarket radio.
SOURCE: Anti-theft code 1995 Pontiac Grand Prix
DO a google search for Radio lock codes with you make model vehicle,, for 7$ you can get it,,here is what I found for a 2000 gp..
1. Press and hold presets 2 and 3 for about 7 seconds until you get 3 digits on your display. This is the first 3 digits you will need, so write them down.
2. Press the AM/FM button to get the last 3 of the 6 numbers you will need. You only have 5 seconds to do this. If you wait too long before pressing the AM/FM button, the display will go back to LOC. If this is the case, just start over at step 1.
3. Call 1-800-537-5140, press 2 for Pontiac, press 620529 and hit the # key. The computerized voice will ask you for your 6 digit code you have written down. Enter that and press the * key. He will then give you your unlock code, and the option to get additional codes. The first one worked for me so do not worry about the additional ones.
4. Set the code into your radio by pressing the hour set button on your radio until it corresponds with the first 2 digits of your code, then press the minute set button until the last 2 digits of your code are entered. Immediately press the AM/FM button once the correct code is entered and the code SEC or "secured" will be displayed. This part of the procedure is outlined in your owners manual.
5. If you want, you can change your code so you will not forget it, or get rid of the theftlock all together. These procedures are outlined in your owners manual, read it if you would like to change these values.
6. turn on the power to your radio and enjoy.
Hints:
- The first 3 and the last 3 digits were the same on my radio. (for example first 3 were 123 and last 3 were 123) First I thought I was doing something wrong when the display wasn't changing, but I wasn't. Just to let you know it is a possibility.
- The dealer code 620529 is an actual dealer. If GM finds out that this code was leaked to the public, they will remove it from their system. If the dealer code does not work when you phone the 1-800 number, you can search for a new dealer code on the internet somewhere. If this does happen, PM me and I will try to find one that works for you.
gaframe = true;
' +
'' + google_ads[i].line1 + '
' +
'' + google_ads[i].line2 + ' ' + google_ads[i].line3 + '
' +
'' +
google_ads[i].visible_url + '
';
}
}
var adsByGoogleRight = "-40px";
if(dartRecieved){
document.getElementById("ga_300x250").style.clear="both";
document.getElementById("ga_300x250").style.left = "0px";
document.getElementById("inner_adv_caption").style.display = "block";
document.getElementById("ga_300x250").style.width = "370px";
adsByGoogleRight = "5px";
}
else if(isHealthinationExist){
var healthinationBox = $('healthonationBox');
if(healthinationBox){
var helthinationBot = getObjXY(healthinationBox)[1]+healthinationBox.clientHeight;
var ga_top =getObjXY(document.getElementById("ga_300x250"))[1];
if(ga_top-helthinationBot >0){
document.getElementById("ga_300x250").style.width = "530px";
}
else{
document.getElementById("ga_300x250").style.width = "410px";
}
}
$('boxAdWrapper').style.display = "none";
}
else{
document.getElementById("ga_300x250").style.width = "530px";
$('boxAdWrapper').style.display = "none";
}
//add "ads by google"
var logo_img = '';
s += '' + logo_img + '';
document.getElementById("ga_300x250").innerHTML = s;
var currl = $('related_links');
var currq = $('related_questions');
if(currl!=null && currq!=null){
var currltop = getObjXY(currl)[1];
if(currltop > rltop )
currq.style.clear="left";
}
return;
};
//-->
SOURCE: How do I put in a radio lock code for a 98 Pontiac
The radio comes with a preassigned lock code that must be obtained from Pontiac. They will need you to follow these steps to retrieve two sets of numbers for them to call GM and obtain the assign lock code for your radio. STEP ONE: Press number 2 and number 3 simultaneously. Hold until the first set of numbers appear. Then press the AM/FM button on the radio for the last set of numbers to appear. Give those numbers to Pontiac, and they will call for the radio lock code. They will also provide you the steps to enter that code to unlock your radio.
90 views
Usually answered in minutes!
×