Question about 2001 Nissan Almera Tino
I can hear cliking comming from the dash sumtimes the heater works
That noise is the heater and AC air temperature control electric blend door motor trying to move a duct door that is sticking due to heat warping. You will need to remove the entire dash assembly and replace the blend door. This door is located between the AC core and the heater core and "blends" the air from each (hot from heater core and cold from AC core) to give the desired air temperature,.
Posted on Oct 11, 2012
the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel
Posted on Oct 28, 2009
Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.
Posted on Jun 07, 2009
Tips for a great answer:
Jun 11, 2016 | Nissan Cars & Trucks
Apr 02, 2016 | Nissan Cars & Trucks
May 03, 2015 | Nissan Cars & Trucks
Mar 17, 2014 | 2005 Nissan Almera 1.8
Aug 16, 2012 | 2005 Nissan Almera 1.6
Oct 28, 2009 | 2003 Nissan Altima
Jun 03, 2009 | 2000 Nissan Maxima
Jan 24, 2016 | 2001 Nissan Almera Tino
629 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: