REMOVING OUTER DOOR HANDLE
SOURCE: How to remove outside door handle and door lock of
take the door panel off and look for nuts to remove door handle.as for the lock it may be a u.clip.pull it down
SOURCE: how do i remove door outside door handle on q7
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can disconnect the linkage connecting to the outer handle and remove the bolts securing the outer handle on
SOURCE: bmw 525 4 doors,how to remove rear door outer handle
has to remove the inside panel door and remove the clip inside to open the handle cover then u can see the two nuts and remove them
SOURCE: 2008 BMW X3, removing the left rear outer door
2004 x3 Rear passenger door handle came off/apart. What are the steps to remove the inner door panel to access the door handle and repair it?
SOURCE: Changing the outside door handle on a 1997 Toyota Starlet
There is two bolts that hold the window slider thing in place. One just below one of the door handle nuts inside the door and the other is on the outside of the door (on the inside of the car). Once these are removed it enables you to move that mech out of the way to get to the other bolt.
I undone the 3 latch screws to give me a bit more movement in the rod that connects to the handle too.
This should give you enough room to get to that other nut and clip the rod into the handle once installed.
Once handle is installed simply just slide the window mech back up into position and bolt back in.
-robib.
991 views
Usually answered in minutes!
×