SOURCE: 1997 chevy cavalier 2.2
Hi, your timing belt is out of timing ,just be sure to aling the marks prrfectly ,you can get the diagram at any auto parts or go to your public library and look for a chilton repair book ..GoodLuck
SOURCE: key will not turn on 2008 chevy hhr
there are two situations that are close to what you describe.
First, is your key STUCK in the ignition? if so, there's a little panel under the steering column, open that, and feel round under there for the latch to release the key. I don't remember what the dealer SAID the issue was, but it was solved with one of many steering column replacements for a different problem.
If the key goes in and out, but won't turn the cylinder... you may have a bad cylinder, a ruined key(bent? run over by car? goobered up lands? plain worn out?) Or, your steering lock is engaged. If it's the first, that's a mechanic replacment(hopefully dealer covered). The second? get a new key. The third? Hold some tension on the steering wheel and turn the key.
Finally, if your battery is dead, or your solenoid is shot, the key won't turn/release either. Use the stuck key removal method, so you can lock your car while waiting on dealer repair.
SOURCE: i drove my chevy hhr 2008 to work and shut the
The key tumbler may have come apart and the vehicle will need to be serviced at the dealer due to having a chipped key, must be recoded.
SOURCE: i own a chevy hhr 2008,this morning im getting
please make sure the vehicle is fully in park, turn the key forward to on and try removing it, while depressing the brake pedal
SOURCE: Key win't turn ignition switch in 2008 Chevy HHR
replace the floor shifter. there is a switch on the shifter that allows the key to move. gm has had alot of problems with these shifters.
553 views
Usually answered in minutes!
×