2000 clk 430 merz remove key signal will not cut off

SOURCE: air conditioner blows hot cold and sometimes not at all why?

hello,seem you need to send your car to authorized dealer to scan the problem,maybe the solution is only synchronizing all the flap,ty

SOURCE: cd changer wont play

All radio accesories are on what is called a d2b ring. This ring consists of your c.d. player,telephone t.r.u. and voice activation module. On some vehicles the factory amplifier and tele aide modules are on this loop. If you have aphone see if it works. I do not think your amp is part of this ring although benz started incorporating the amp. in 2000 model years. The way this system works is that the head unit sends a wake up signal and verifies that these components work. Each components is in series and the last one in the loop sends the signal back to the head unit. It is easy to determine if you have a problem in your d2b ring if none of these components work. Although the head unit reads no changer I would make sure all of the c.d.s are installed correctly. You can also try and remove the unit and there should be areset button you can push in with a ball point pen at the base of the unit.

SOURCE: how do i get into the trunk of my 2000 clk 430 if

get a portable jump starter.it really a portable battery with cables and attachments.if you have a cigarette lighter.remove lighter.plug the cable into the cigarette lighter.it should give you power to open trunk.

SOURCE: on my 2000 clk 430 mercedes the blower motor is

Sir,
It can be fuse but you are also to check if the it motor of blower has have not burned or had any broken wire.

mx5turbo92

• 545 Answers
• Posted on Dec 17, 2009

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.