Question about 2005 Nissan Almera 1.5

1 Answer

Nissan almera battery removal

Save radio code

Posted by Allen Rollings on


1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Nissan Master
  • 85,239 Answers

Hook a charger up to the battery cables and then remove them, the code will not be lost. Any small charger will do.

Posted on Sep 20, 2012

  • graham Oct 01, 2013

    1 Loosen and remove negative connector from battery. 2 Grip a 10mm tubular spanner / socket tightly in a set of mole grips 3 lever up the part of the connector, that projects out to the right. force in a 10mm tube spanner / socket preferably on an a hex extension (small kits usually have these in them). You may need some form of small pry bar for this. 4 slowly and carefully use the grips / socket tool above to loosen the nut fastening the connector cable array to the battery 5 lever the assembly off the battery and twist away from battery. (This is awkward and contrived). 6 when in a position you can access the nut, continue to loose and remove both nut and washer. KEEP SAFE! 7 Remove socket from mole grips 8 grip square head of bolt on battery connector, you have just removed from battery. 9 Re-insert from other side and loosely fasten removed nut/washer 10 remove battery securing plate with extension bar and socket 13mm or 1/2" 11 remove old battery 12 replace with new one and tighten and connectors and securing plates.



5 Related Answers


  • 1 Answer

SOURCE: I have Nissan ALMERA 2001

any nissan dealer should be able to give you code

Posted on Sep 09, 2008



  • 146 Answers

SOURCE: Am i putting code in radio right

Are you sure it is a Nissan audio system. Nissan does not use codes in their radios. You must have an aftermarket radio.

Posted on Jul 27, 2009

xxxxxx xxx

  • 5013 Answers

SOURCE: cd code

Your radio is made by CLARION and the only CLARION code available for free (using a serial number ) from anywhere on the Internet is if your radio also has a BARCODE SERIAL NUMBER beginning with C7000000 + + + + on a label somewhere on the metal casing.
(There are usually two barcodes on one label. The one required is the lower one )

If not then it will only be available from your Main Dealer or a Decoding Service 

Posted on Sep 15, 2009


  • 20 Answers

SOURCE: Radio says Secure on Nissan Almera Tino (04)

call a nissan dealership gine them your vin number and they will give u the radio code then u enter it in your radio write it down in ur car somewhere in case it happens again

Posted on Oct 09, 2009


  • 1 Answer


i losted my nissan almera car key and i don't have the code to make a new key in my country's now in lebanon exported frfom swiss

Posted on Oct 11, 2009

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I put the code on the radio of a 2007 Honda Ridgeline radio?

Having the code and putting it in will make no difference. The radio works. The code is only used after the battery is disconnected. At that time the radio is completely dead and is in anti-theft mode. Entering the code physically makes the radio work.

The bulb or LED that provides the back-light has failed.

Aug 07, 2018 | Honda Cars & Trucks


Get your car's radio code here

Need the code to make you radio to operate again?

There is a simple way to get this accomplished

Go to this website to reteive the needed code

You will be glad you did saving tons of cash which any New Car dealership charges you preview_graphic.jpg

on Sep 18, 2010 | BMW Z3 Cars & Trucks



I constantly read frequent requests for RADIO CODES referring to the disconnection of battery power ( whether its for changing the battery, etc.) and the radio is now INOP. Here is a simple way to save radio codes, radio stations, clock time and computer settings. Purchase from an auto parts dealer, a 9 volt battery powered lighter socket connector. Plug into lighter, do your battery work, After work is completed, disconnect, and radio will work as before. Unit will cost less than 20.00 and well worth it.

on May 11, 2009 | 1993 Cadillac DeVille

2 Answers

How do I save the radio code once I put it in It is a MICRA 2015 build

You need to be certain you are entering the correct code in the correct way to avoid being permanently locked out of the radio.

Different territories and models have slightly differing radios and the coding sequence can vary slightly. The vehicle literature pack should either contain an audio manual or the details will be found in the vehicle handbook.

Sep 21, 2016 | Nissan Micra Cars & Trucks

3 Answers

How do I get the radio code for my clio serial number RN258F20161900 Y321

this code is 1684

  • Renault radio codes now available here 24/ waiting

Jul 13, 2016 | Cars & Trucks

1 Answer

How do I reprogram the Radio

If you have a owners hand book or can get a copy from the web the there is a section on how to install the code and save it in the radio . In some radios it is as simple as pushing the set button twice .

Feb 14, 2014 | 2000 Audi A4

1 Answer

Changed the battery and the radio needs a code. 1991 mercedes 300D 2.5 turbo

Upon submission of your car registration and driver's licence to any Mercedes Benz dealership, a servicemanager will gladly lookup the respective radio code for the model car.Thereafter,save the code in a safe place and for easy access you can save the code on your cell phone

Jun 01, 2010 | 1991 Mercedes-Benz 300 Diesel

1 Answer

Escort van need code for radio,can anyone help please? van is w req with m series radio

Normally the code is either in the manual, the glove box or behind the radio itself.
Check the radio last as it might require you to remove some panels, but try to slip under and behind the dash with a mirror/light first, could save you some time.

Feb 07, 2010 | 2000 Ford Escort

2 Answers

Need code

You should be able to enter the 4 digit code via the radio. If theradiohas been replaced, you may need to recover the radio's serialnumber: Porsche Boxster: Online Lost Radio Code Recovery Tool

Jul 02, 2009 | 2000 Porsche Boxster

2 Answers

96 jetta treck wont start ( radio written SAVE )

I will work with some assumptions here.Your radio has a hole in each corner of it.Use nails and insert into the holes.GENTLY pull radio out and there should be a sticker on the body of the radio with a 4 number code.Write it down and put the radio back into the dash.Hold the scan and mode button in at the same time and the word SAFE will go away.Now,your station preset buttons are the keyboard.Push the #1 preset repeatedly until the first number in your code is displayed.then on to 2 for the 2nd and so on.After you put in your 4 number code,hold in scan and mode again and in about 2 seconds,tunes!!!!!You might get lucky and call your local vw dealer with the VIN of your car.They might have your code on file.Will save you a lot of trouble as the radio is not easy to remove.
best of luck!!!

Apr 22, 2009 | 1996 Volkswagen Jetta

Not finding what you are looking for?
2005 Nissan Almera 1.5 Logo

Related Topics:

1,393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides