SOURCE: Need the wiring Diagram for a 1999 Silverado
Your public library will have a manual covering your mechanical repair. Moreover, they have the automotive shops online software called AllData. It is the best auto technician database available today. You can print out specific troubleshooting procedures, diagrams, step-by-step istructions, and soforth. The typical person cannot afford to pay for this service, just automotive dealerships, etc... that is why the public library made it available to everyone and for free to view and print out material. This should Fixya! Good Luck!
Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.
SOURCE: my 2006 gmc yukon xl drivers seat will not move
Under the drivers seat at the rear is a black plastic cover. Remove the cover , it is over the main harness to the seat. Unplug the seat harness and inspect the connection. I see alot of these get knocked loose or get corroded. Good Luck.
SOURCE: Heated seat
It is the heatling element, stock elements have a single wire snaked through the element and when the circuit breaks it is done, aftermarket elements have a wired grid that if one area fails it still works, they also spread a more even heat.
SOURCE: Heated Drivers Seat Ford 500 2006 will not work.
It is usually one of two problems. Either the relay under the seat has failed or the heat element in the seat has failed.
If you are not electrically challenged, you can use a simple volt-ohm meter and check for continuity in the heat element. If you have continuity, the element is good, otherwise that's your problem.
If the heat element is good, you may want to take the good relay from under the passenger seat and put it on the driver's side to see if that fixes it. If so, then you have to get a new relay.
Last, but very unlikely, would be a bad switch.
1,748 views
Usually answered in minutes!
×