WILL NOT SHIFT INTO GEAR AND CODE P0765 POPS UP
SOURCE: 2005 Jeep Liberty Renegade Differentials
This totally depends on how Much "Hard Driving" that you do. Offroad, 4x4 all the Time, ETC.... If you do I would Change at every 50,000 If not Every 80,000 is OK
SOURCE: 02 jeep liberty won't shift into 3rd or 4th gear.
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
SOURCE: power locks on 04 jeep liberty not working
Most of the times on jeeps and all chrysler auto's they have a body control modual this is what controls your door locks , windows ect. It should be in the owners manual for all fuse location and identification. A shop with a scanner can check the door lock system for you. body control moduals go bad alot on all chyslers and if you buy one you need to buy it from the dealership they will program it . So check the owners manual for a fuse and then have the body control mod checked
SOURCE: 2007 Jeep liberty auto trans will not shift from 2nd
YOU NEED TO HAVE TRANSMISSION CONTROL SYSTEM SCANNED..IT HAS DETECTED A PROBLEM IN THE ELECTRICAL SYSTEM,INTERNAL OF TRANS OR A SENSOR FOR TRANSMISSION..A TRANSMISSION IS AN EXPENSIVE COMPONENT..YOU SHOULD GET IT CHECKED ASAP..ESPECIALLY IF YOU HAVE NO WARRANTY LEFT
SOURCE: my jeep won't shift out of 1st gear
bad shift silonoid or possibly the pressure sensor,also could be a clogged filter.
999 views
Usually answered in minutes!
×