Question about 1998 Oldsmobile Bravada
Security light flashing and car wont start
The security light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. Remember too, the TDM controls the security light. Sometimes you can have ALL the symptoms and no lights.
This link may help you.
Posted on Sep 25, 2012
This happens due to a failed or failing antitheft system. When the system cant communicate properly, it will disable your starter or injectors and show the SECURITY light. Go to this link for info and ways to beat this system yourself.
Posted on Nov 20, 2011
SOURCE: security light flashes
from what i have read, it is design to cut the gas supply so no one can still your car. Mine car wouldn't crank at all with the light blinking. turn the key to the on position and wait 10 minutes. turn it off and try to crank it. it has worked every time on mine. I have also read to cut the LITTLE yellow wire that runs from ignition,but i don't feel comfortable cutting wires even though you can always reattch the wire.
Posted on May 25, 2009
does it start at all, or does it run for about 1 second and shut off? if the latter, then it's the passlock system, and he could have a defective key or security module. the keys have a predetermined resistance value which activates the passlock system to prevent hotwiring. If it is the passlock system, then sometimes you have to wait 15-20 mins for it to reset before starting the engine.
Posted on Jun 20, 2009
Tips for a great answer:
May 17, 2016 | 2003 Chrysler Sebring
Oct 23, 2014 | Volvo S80 Cars & Trucks
Oct 10, 2014 | 2000 GMC Jimmy
Jan 31, 2011 | 1996 Buick Regal Olympic Gold
May 14, 2010 | 2000 GMC New Sierra 1500
Mar 25, 2010 | 1998 GMC Jimmy
Aug 12, 2009 | 1995 Jeep Grand Cherokee
Jul 22, 2009 | 1999 Pontiac Grand Am GT
Mar 08, 2009 | 2000 Oldsmobile Alero
Feb 09, 2009 | 1993 Pontiac Bonneville
938 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: