Question about 2002 Oldsmobile Alero

1 Answer

My dashboard and rear lights don't work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 54,386 Answers

Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Posted on Sep 15, 2012

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dashboard & Highbeams Don't Work


DRIVERS SIDE BULB IS PROBABLY BAD, SWITCH THE LEFT TO THE RIGHT AND SEE IF YOU HAVE THE SAME PROBLEM. IF YOU DO... IT A WIRING PROBLEM. GOOD LUCK

Nov 03, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

My dashboard lights don't work


Do you have the dash light dimmer control turned off by chance?

Oct 27, 2012 | 2003 Chrysler Town & Country

1 Answer

Part of the lights on the dashboard lights on one side and the other side don't light on


Check the tail lights if they are noe working check the fuse marked 'tail" in the fuse panel at the left lower dash replace this fuse, it also powers the dash lights.

Sep 14, 2012 | 2003 Toyota ECHO

1 Answer

Where is the fuel pump relay on a 2008 jeep Liberty


Left side dashboard facing the door. Remove the oblong panel.

The fuse panel diagram is in your owners manual, if you don't have one, go to Jeep.com and download it for free.

Fuse Panel Description
Cavity Fuse Description
  • 1 15 Amp Blue Horn Relay, Power Sunroof Relay, Power Window Relay
  • 2 10 Amp Red Rear Fog Lights (Export Only)
  • 3 20 Amp Yellow Cigar Lighter
  • 4 10 Amp Red Headlight Low Beam Right
  • 5 10 Amp Red Headlight Low Beam Left
  • 6 20 Amp Yellow Body Control Module/Power Door Locks
  • 7 10 Amp Red Left Park Light/Left Tail Lamp/License Plate Lamp
  • 8 Spare
  • 9 10 Amp Red Right Park Light/RightTail Lamp/License Plate Lamp/ Cluster
  • 10 Spare
  • 11 15 Amp Blue Flasher
  • 12 15 Amp Blue Stop Lights
  • 13 10 Amp Red Body Control Module/ CMTC/Cluster/Pass. Airbag On,Off Indicator, Auto Daylight Mirror/Light Bar Switch (Renegade Only)
  • 14 10 Amp Red PDC Fuel Pump/AC Clutch, Starter Relay/Engine Controller/Transmission Controller (Diesel Only)
  • 15 Spare
  • 16 20 Amp Yellow Power Outlet (Rear)
  • 17 15 Amp Blue Rear Wiper



Sep 02, 2012 | 2008 Jeep Liberty

1 Answer

Dashboard lights and tail lights don't work 95 toyota corolla


The circuits are on two different fuses, but both are controlled by the headlight switch. I would check for power at those fuses then at the switch.

Aug 16, 2012 | 1995 Toyota Corolla

1 Answer

My ABS/Brake light in dashboard is on .


I didn't have that issue,but I had a 1992 dakota with
rear abs only & I just unplugged the module under the dash

I'm all for diagnosing everything & having it factory stock & working

But you don't need abs on a 4x4 that old & the rear hydraulic
abs unit ,gets so rusty that it is sad.

If you ever replace rusted brake tubing, remove it

They don't check that in inspection

Jun 06, 2012 | 1999 Dodge Ram

1 Answer

Dashboard lights are out and rear lights, also a pulling sensation when changing gears especially and a horrible sort of screeching noise when I start the engine!!


You aren't alone with your lights problem . Mu '59 Picanto did exactly the same thing last night. No dashboard, heater, or air vent illumination and worse still no rear lights (note brake lights do work). Got home switched off everything, then switched back on and all working. Very strange.

Apr 11, 2012 | 2009 Kia Picanto 1.1

Not finding what you are looking for?
2002 Oldsmobile Alero Logo

834 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...