Question about 2008 Dodge Grand Caravan
The drivers side passenger power sliding door is not working. I can only open and close it manually the power windows dont even work the right side works fine.
The 30A fuse J11 in the totally integrated power module (TIPM) protects the driver side power sliding door module. The 40A fuse J3 in the totally integrated power module (TIPM) protects the left rear door module. If these two fuses are good, the modules may be defective.
Posted on Sep 10, 2012
could be a partially broken wire in the wiring harness that runs in the door track. the wires are inside what looks like a plastic chain that allows it to move with the door and have seen them partially break not allowing power to flow the whole time
Posted on Feb 19, 2009
SOURCE: Power sliding door doesn't work!
Try taking off the door, or spray some wd-40 on the rail. It sounds like its either not getting enough power or its getting caught on something.
Posted on Apr 23, 2009
the door track cable on the right side will have a broken wire in it,the drivers side will be the door control module inside the door
Posted on Sep 04, 2009
We have the same problem, just opposite doors - the passenger slider will close to 80%, but the driver still functions fine. There must be an easier solution than new wiring harness/motor??
Posted on Sep 20, 2009
Tips for a great answer:
Sep 15, 2014 | 2008 Honda Odyssey
Nov 24, 2017 | 2006 Dodge Grand Caravan
Aug 19, 2009 | 2005 Dodge Caravan
Jul 07, 2009 | 2008 Dodge Grand Caravan
Apr 15, 2009 | 1997 Oldsmobile Silhouette
Apr 11, 2009 | 1994 Dodge Caravan
Jan 17, 2009 | 2005 Dodge Caravan
Dec 24, 2008 | 2005 Dodge Caravan
Mar 20, 2017 | 2008 Dodge Grand Caravan
3,741 people viewed this question
Usually answered in minutes!