2002 Jeep Liberty Logo

Related Topics:

Posted on Sep 08, 2012

Were is the slave cylinder located on a 2002 liberty 5 speed

I just need to know where the slave cylinder is located on a 2002 liberty sport 5 speed

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 18 Answers
  • Posted on Sep 09, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 09, 2012
Answers
18
Questions
0
Helped
5089
Points
24

SIDE OF TRANSMISSION.LEFT FRONT

4 Related Answers

Anonymous

  • 2926 Answers
  • Posted on May 18, 2010

SOURCE: where is the oil filter located

Front right side of engine. It is tucked up above the power steering hose just to the right of the lower harmoic balancer pulley. It is only accessible from under the vehicle.

Testimonial: "Found it right away. Thanks!"

Ad

Anonymous

  • 10 Answers
  • Posted on Jul 29, 2009

SOURCE: radio fuse

# 18 for radio and it is a 20amp...see below for all #'s got to and amps... 1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Anonymous

  • 7353 Answers
  • Posted on Oct 16, 2009

SOURCE: The transmission is a 5 speed and its 2 wheel dr

find the clutch master cylinder follow the line down to the trans, it ends at the slave cylinder

arnold saavedra

  • 7 Answers
  • Posted on Apr 07, 2012

SOURCE: 2002 jeep liberty sport park/neutral switch location

Try and going to the parts dept. at the dealership ,ask them to print you a picture.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Luz marcada con el numero cinco?

2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


0helpful
2answers

Location of slave cylinder on 2005 Jeep Liberty

On the drivers side. under the vehicle. Mounted to the transmission. I recommend you replace the master cylinder also. Mounted to the firewall.
0helpful
2answers

Where is the location of the slave cylinder in a Jeep Liberty 2005

Near the engine on the transmission side of the connection.
0helpful
1answer

How to replace clutch master cylinder 2002 jeep liberty

the fsm covers this. ever heard of the factory service manual.?
on my wranger the whole system is replaced as one.
slave, mc and the hoses are married.
alldata.com
log in and read.
or go to jeep and look.???? really its there to see at any moment
here it is.
ill pretend 5speed, V6, sport

as you can see , the part id is just #1
all in one.
see it?


http://www.factorychryslerparts.com/showAssembly.aspx?ukey_assembly=624293&ukey_make=1064&ukey_model=15531&modelYear=2002&ukey_category=20303&ukey_driveLine=7344&ukey_trimLevel=18760

now you can see any part any time ,
no more guessing
the procedures are in the FSM or at alldata.com
fully documented, and jeeps have the best docs. IMO
2helpful
2answers

5 speed Jeep Liberty clutch barely engages when vehicle first start.

If your clutch is hydraulic uses a master cyl. and a slave cyl. It sounds like the slave cyl. but could be both.
0helpful
1answer

2002 jeep liberty sport my speed sensor went so i changed both and the computer says its still the speed sensor whats wrong...

I assume you replaced the input and output speed sensors on the transmission?

The speed sensor for the speedo is located in the rear differential. Look on top of the center of the rear differential and you should see a sensor bolted to it with two wires. Check the wiring harness to the sensor. Sometimes they rub through on the E-brake cables. If the wiring is good replace the sensor in the rear differential.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

2002 jeep liberty 3.7 liter 6 cylinder 4x4 spark plug gapage. What should it be?

Make: JEEP
Model: LIBERTY - SPORT
Year: 2002
Engine: V6 - 3.7L - FI - - GAS

Part Number RC9MC4 .044" (Original Equipment Manufacturer and/or Original Equipment Equivalent)

Hope helps (remember to rated and comment this).
0helpful
2answers

The transmission is a 5 speed and its 2 wheel dr 93 Jeep Cherokee Sport.Where is the slave cylinder in the transmission located?

There are two versions...the easiest to work on is located on the drivers side of the bellhousing. The other version is inside the bellhousing and is part of the throwout bearing (there will be a hose connection going into the bellhousing and a bleed valve protruding from the side of the bell housing on those) This version is used on later models but I have seen it used when engine/trans swaps have been previously made. Clutch master is on the firewall on the left side of the brake master cyl.
1helpful
1answer

2002 dodge diesel 2500 5 Speed....... Clutch will

if master cylinder and slave cylinder.is good and have brake fluid is in system and no leaks.problem is in the clutch and pressure plate.
Not finding what you are looking for?

244 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...