SOURCE: head bolt settings
1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.
SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage
I need the torque settings and pattern for a Kia Sportage 2.2
SOURCE: torque settings and sequence for cylinder head
about 80lbs and start in middle and work outwards ,one left then a right side ,another left and so on
SOURCE: torque settings for cylinder head nissan sentra
Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees
SOURCE: head bolt torque settings for 720 nissan cab 2
dear friend-your torque setting on the 720 is the same as the L18 and is set at 85 - 90 nm.
Fig. Cylinder head bolt loosening sequence - Altima & Maxima 3.5L engine
Install the cylinder head bolts and torque in sequence as follows:
3,991 views
Usually answered in minutes!
Need model and engine type and size
it's 2009 d40 with yd25ddti engine, 2.5 turbo diesel.
×