Blow hot air , heater works great . Change the fuse and it worked for a few minutes and blew the fuse - then only warm air comes - not cooling
SOUNDS LIKE YOU HAVE A SHORT IN THE WIRING BETWEEN THE FUSE AND THE AC PANEL, USE A CONTINUITY TESTER TO CHECK FOR CONTINUITY , IF THAT FAILS OR IS OK THEN CHECK ALL RELATED RELAYS IT MAY JUST BE THAT YOUR AC NEEDS RE GASSING?
SOURCE: Range Rover Heater
my rover does the same thing. it is a switch that costs about $30 and is a pain to do yourself. I found this out from several range rover forums that i posted my problem on. try www.robisonservice.com to get the detailed explaination.
SOURCE: heater output goes from hot to cold
It sounds like you have a blocked heater core ( Small radiator that the interior fan blows through to create the heat inside the car), If you can get access to the heater core pipes you might be able to flush it out but usually they need replacing.
hope this help
SOURCE: Heater blows hot air on driver side but cold on Passanger side ?
either the heater rad is chocked up and its not hot all over,or its a flap opening problem
SOURCE: Land Rover Discovery II 2000 with heater on it
have you checked your coolant? that might be why its blowing cold air
SOURCE: air conditioner or heater air wont blow
check hvac fuse. if fuse is okay.check to see if blower motor getting power if yes blower motor faulty.if no blower motor control switch is bad if fuse and relay okay.
323 views
Usually answered in minutes!
×