Door jamb switch
all doors there are drivers, and then OTHERS, (wiring)
its wired OR logic, so any switch grounds, it turns them on.
and is programmable on all cars. to have this on or off (features explained in the operators guide, lost that?)
CRV has 3 lamps
front dome
rear dome
and spots.
all of them are messed up? for all doors.
if yes, ITS programming. is wrong.
the rear light is directly controlled lamp to rear lamp. (hatch glass or gate switches.
and has a slide switch, off,on, auto.
the spots lamps are direct. on, or off
the front however is totally different and wired unique.
as you know the drivers door is unique, as it operates the
keys left in igntion, or head lights left on, mode. so if those work
right then the drivers door switch, is,, working......
the front dome
has 3 modes. again , off , on and auto .
Auto is the MCU , unit, the MCU sees any door open and the front dome gets input to the AUTO pin, and if in auto the lamp glows.
i dont think the MCU is programmable but do read the oper guide for that., i dont have one.
×