Question about 2001 Dodge Durango
Installing tail light how do you do it? and to the guy who told us about the security reset button i want to thank you so much. has been cranking working on driving it to far yet
Open the rear door, locate the two screws next to the tail light. They will be philips head. Take them out, pop off tail light, unhook light harness. Reinstall is opposite of removal.
Posted on Sep 09, 2012
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
SOURCE: DASH AND TAIL LIGHS DONT WORK
Check and see if you have trailer wiring on your truck. If so you do it may have a wire that is rubbed though the isulation and grounding on the body and shorting the circuit blowing the fuse. High resistance in a circuit is what blows fuses.
Posted on Feb 15, 2009
the crank sensor is located passenger side back of the engine were the trans and engine come together .there are 2 - 13mm.bolts that bolt to top of the engine.
Posted on Feb 22, 2009
Tips for a great answer:
Oct 19, 2015 | 2001 Dodge Durango
Sep 16, 2014 | 2001 Dodge Durango
Mar 25, 2014 | 2004 Dodge Durango
Aug 18, 2013 | Dodge Durango Cars & Trucks
May 17, 2017 | Dodge Durango Cars & Trucks
Dec 23, 2017 | 2001 Dodge Durango
Jun 02, 2009 | 2001 Dodge Durango
May 31, 2018 | 2001 Dodge Durango
323 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: