I need a diagram for the tail and brake lights for a 1972 chevy el camino
SOURCE: need a wiring diagram for a chevy s10. brake
your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.
SOURCE: brake light wiring diagram 1972 Gremlin
I have a 72 amx, the two wire conector at the brake light switch down on the brake pedal is light green and pink and the plastic connector is brown and plugs into the switch at the top of the brake pedal.
SOURCE: rewiring 1959 chevy el camino
Are you needing advice, links, tricks, or all of the above?
If it's advice you want:
If you are not buying an after market harness and all of the oem wiring is intact replace one wire at a time from the component all the way back to the fuse box. Its tedious but, it's a sure fire way to get it right the first time.
Secondly, I'd by a haynes manual or some other wiring diagram. Study it for at least a couple weeks or until you are completely comfortable taking on the task.
Color code your wires and label both the old and new ones with paper tape and a permanent marker so that you know what each one is for.
Last but not least, make sure that the battery is disconnected... ;o)
SOURCE: 2004 tail light wire diagram/colors, need both bra...
I can't get my brake lights to work. the rear one in the window works but the tail ones won't work.do you have any ideas as of what to try to fix this problem. Thanks!
JO
SOURCE: I need the vacuum hose diagram for a 1978 chevy.
This one is not for California. If you have california car, please let me know
1,102 views
Usually answered in minutes!
×