Need spark plug diagram - 1989 Ford Crown Victoria

Had difficulty preparing the diagram. Here is a video: How to Replace Spark Plug Wire Set 95-97 Honda Accord - YouTube
I'll try again as you won't be amused by that. Cylinder Firing Orders & Engine Diagrams - AutoZone Hmm, still trying.
4 - 3 - 2 - 1 for the spark plug wire routing of a 1997 Honda
If you need more information on how to replace the spark plug wires on your Honda Accord, you can check out this video tutorial from 1A Auto. It provides step-by-step instructions for properly replacing the spark plug wires on a 1995 Honda Accord V6 2.7L, but the procedure is similar for all 95-97 Honda Accord V6 2.7L models.

Lancer? Galant? Year?

All questions need 'year make model' as first 3 words.

https://www.google.com/search?q=2.0+Mitsubishi+Spark+plug+Wiring+diagram

..

Here is a diagram showing the spark plug leads attached to a coil pack:

Ignition coil
Spark plug lead
Spark plug
In this diagram, the ignition coil is at the center and is connected to the spark plug leads, which are in turn connected to the spark plugs. The spark plugs are located at the end of each spark plug lead and are responsible for igniting the fuel in the engine's cylinders.

In a typical engine, there will be one ignition coil for each cylinder, and the spark plugs will be connected to the ignition coils through the spark plug leads. The ignition coil generates a high voltage electrical current, which is transmitted through the spark plug leads to the spark plugs. The spark plugs then use this electrical current to create a spark, which ignites the fuel in the engine's cylinders and powers the vehicle.

buy a hanes repair manual and it will have the diagram in it

here is a diagram, if u can't see it go to the link below.
http://autorepair.about.com/library/firing_orders/bl-fo-9225.htm

I can't upload the diagram but the firing order appears to be 1,4,6,3,2,5

Install the spark plug wire(s) (1, 3 and 5) to the engine right side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

Install the spark plug wire(s) (2, 4 and 6) to the engine left side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

You can get a copy of the service manual from Promanuals.net for cheap.

FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

Hi
Here is a diagram.

I dont understand why you would need that unless you took off all the wires and took out all the plugs and forgot how the wires were.I have the same truck and I always do the plugs and wires one at time to make sure I make a mistake.If this is your ploblem let me know because i might be able to walk you though it.