SOURCE: Need an ecu wiring diagram
what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.
SOURCE: 1996 Nissan Maxima oxygen sensor
hye there ,,there are 3 o2 sensors on your car,,one for each bank,,,and the 3rd sensor is located after the cat this one usually goes first,,,,just make sure you no if your cars an import or not as they can be different,,,then you should be safe when ordering ,,hope that helps,,,
I had a problem on my Nissan Xterra 2000. Symptons sound similar. In my case, it ran fine for a while and then suddenly the engine starts to stumble and lose output. At one point it did not even have enough HP to move. Irregular idling too. Thought it was water in my fuel. Bought water remover from the store and added to gas tank. Problem did not go away. Instead, "Service Engine Soon" light came on. Had to have it towed to the dealer as there was no way the engine could keep up with traffic. Dealer replaced the "Crank Position Sensor" today. Parts $33.00, Labor: $300 (about 3 hrs worth of work). Seems to work fine now but I will wait and see. Dealer also stated that Distributor bearing appears to be noisy and will need to be replaced sooner or later. I will wait for it to go before I fix that.
SOURCE: 93 Nissan Altima idles rough and has no power.
check exhaust back pressure . can have no more than 2 to3 inch pounds off pressure. may also want to check timing marks.
SOURCE: need factory wiring diagram please.
Many times the local library will have a technical section with wiring diagrams in them. Some you can even get online. Good Luck!
432 views
Usually answered in minutes!
×