Question about 2006 Citroen Berlingo 1.9d

1 Answer

How to set timing on a citroen berlingo 1.9 diesel

The cam snapped in half,got a new cam but cant sort out the timing as cant find timing marks.the engine is turning over ok but it wont fire,heater plugs etc are fine,please help

Posted by jfscooby on

Ad

1 Answer

Steve James

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

How to set timing on a citroen berlingo 1.9 dieselThat's the question....butwhere's the answer? Diesel pump positioning? (Done Cam & Flywheel locked.....)

Posted on Oct 30, 2013

Ad

1 Related Answer

alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: how to remove a citroen berlingo dash board

Not very difficult once you disconnect the battery ,then remove the steering wheel and work from their following your nose for the screws ,i think the fittings that hold it in place and the heater unit are on the engine side of the firewall so you have to remove the wiper motor and the plastic trim below the screen .This is a lovely job to do and i dont envy you on this just done a peugeot 306 heater core still have the scratches all over my hands

Posted on Feb 27, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We're is the crank shaft sensor on 2005 1.9diesal Berlingo van


Adam, Link below may help.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

2005 1 9 diesel Berlingo crankshaft sensor location Google Search

How To Check Crank Shaft Position Sensor

Citroen Berlingo Crankshaft Sensors Up to 50 off dealer prices

Feb 26, 2016 | Cars & Trucks

2 Answers

Citroen Berlingo 1.9d. 2002. Fitted with DELPHI injector pump. Timing of cam belt & flywheel is by locking


I have been doing research on the Delphi pump and it apparently is associated with lucas/cav and as such is timed by the use of a dial test indicator that, through the use of a plunger and cam, runs on the cam block in the pump and determines when injection begins. Initial timing is to set the flywheel on the injection timing mark and the pump flange mark set on the timing case mark. To get it exact I would recommend that you have a diesel pump shop do the timing using the correct tools. As the pump is not electronic as such (from my research into Delphi ) it is basically a manual injector with a electronic controlled governor. Any way the best advice is to have a pump expert set the timing.

Jan 05, 2014 | 2004 Citroen Berlingo 1.9

2 Answers

Hi I need a pic for the timing on a berlingo 1.4 8valve


Hi,

There is a site that can provide you with specs, service manuals and just about else concerning your Berlingo. CLICK HERE

I trust this will be of assistance.

I have no personal interest or association with any product that I may suggest.

May 20, 2012 | 2006 Citroen Berlingo 1.9d

1 Answer

Hi. I need a picture for the timing marks on a berlingo 1.4 8valve


There is only 1 mark on the cam shaft which alines with a hole on the head that will give you valves 1+2 rocking. Then you remove a spark plug on piston 1 and find TDC top dead center ( when the piston is on it's highest point.Thats the only way.

May 20, 2012 | 2006 Citroen Berlingo 1.9d

1 Answer

Citroen berlingo crankshaft pully layout


Citroen has timing hols where you can put a 8mm bolt in the pulley and a 6mm in the crank to lin them up check this pdf on timing. it'll help From Shawn Howell http://www.search-document.com/pdf/1/citroen-berlingo-timing-marks.html

May 08, 2012 | 2006 Citroen Berlingo 1.9d

2 Answers

How to set timing up on 1.6 Hdi engine without reluctor after cambelt snapped


please state year and model of this engine as they do change ,i think its a citreon something like a berlingo or maybe a 306 or whatever but need the year as the common rail is different to the injector pump model or is it a dreaded my favourite motor and thats a renault

Feb 29, 2012 | Citroen Cars & Trucks

2 Answers

Crankshaft timing belt sprocket correct position on assembly


Go to this address http://www.search-document.com/pdf/1/citroen-berlingo-timing-marks.html

Jan 10, 2012 | 2004 Citroen Berlingo 1.9

2 Answers

Drive/fan belt citroen berlingo


Look under the hood on top of the radiator there is usually some type of a sticker there which show the pulley setup

Nov 29, 2009 | 1987 Cadillac Brougham

Not finding what you are looking for?
2006 Citroen Berlingo 1.9d Logo

Related Topics:

1,667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14846 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...