Question about Chevrolet Cars & Trucks

1 Answer

Serpentine Belt replacement diagram on 1989 Chevy Blazer w/ 4.3 engine

How do I replace the serpentine belt. Need a diagram.

Posted by jmacie1958 on

Ad

1 Answer

Stephen

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 21,873 Answers

There should be a diagram sticker on the hood or the fan shroud.
You can also draw a diagram before you remove the old belt.
There is a spring loaded tensioner you move over to release pressure on the belt.
I can upload a diagram if you can't find the sticker.

Posted on Aug 22, 2012

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: need diagram for instaalling serpentine belt on

Picture is for the carbureted model but has the same patter as my fuel injected model. It's actually pretty easy to see how it goes. If the pully has groves then the grove side of the belt will fit right in it prefectly. If it's smooth then the back side of the belt with run along it. To loosen the belt tensioner do two things. first in the picture below you will see in the top middle you will see the tensioner. The back of the belt runs along it. You will notice that it looks like a solid peice. loosen the top slighty with i believe a 15mm. After that connect to the pully attached to it and pull back to the passenger side until you can slid the belt off the alternator. put back on in reverse order. really really simple once you do it. good luck
11f4983.jpg

Posted on Oct 23, 2009

Ad
blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

Anonymous

  • 12 Answers

SOURCE: serpentine belt replacement 1994 chevt silverado 5.7 lt

call your local autozone and the will tell you over the phone or fax you a copy

Posted on Feb 14, 2009

Charles Moore

  • 314 Answers

SOURCE: serpentine belt diagram for 2003 chevy impala

send an email to [email protected] and I will send the diagram to you

Posted on Jun 23, 2009

Anonymous

  • 20 Answers

SOURCE: Diagram of Serpentine Belt 1998 Chevy Cavalier

diagram should be on the radiator shroud / top of radiator

Posted on Jan 10, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Chevy S10 Blazer Serpentine Belt replacement


You use a breaker bar to move the tensioner, remove the belt and use the tensioner to put it back. You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley positions on the fan shroud or radiator support.

Jun 25, 2012 | Chevrolet S 10 Cars & Trucks

1 Answer

1989 cadillac eldorado 4.5l i need the diagram for the serpentine belt


okay, let me try to help you, its a 1989 eldorado 4.5 engine. here you are a diagram of the belt routing, hope this helps . good day.2_17_2012_8_59_07_pm.gif

Feb 17, 2012 | 1989 Cadillac Eldorado

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Need to replace serpentine belt


    Serpentine Belts are relatively easy to replace with just a wrench. Locate the tensioner (spring loaded) and when you move it CW it will loosen the belt. There should be a diagram of the belt routing on the frame close to the battery, if not it will also be in your owners manual.

    Aug 01, 2011 | Chevrolet Chevy Cars & Trucks

    1 Answer

    Diagram for the serpentine belt


    Chevy made at least five different engines for pickups in 1989, and with a lot of accessory options. Check this link and select your pickup and engine size. When you get the listing of belts, if you see a small camera icon in the left column, click on it and you will see the diagram of the routing.

    May 27, 2010 | 1989 Chevrolet C1500

    1 Answer

    1996 Blazer: How do install a 1996 chevy blazer serpentine belt...


    It will have a diagram right above the fan blades to show you how it needs to be ran. Just need to release some pressure off the belt tensioner to make it all fit

    May 16, 2010 | 1996 Chevrolet Blazer

    1 Answer

    Diagram of Serpentine Belt 1998 Chevy Cavalier


    diagram should be on the radiator shroud / top of radiator

    Jan 10, 2010 | 1998 Chevrolet Cavalier

    4 Answers

    NEED DIAGRAM FOR ROUTING THE SERPENTINE BELT


    PLEASE DON'T FORGET TO RATE--You didn't post the size of motor so please pick the applicable one:

    e8f5627.gif
    Accessory serpentine belt routing—4.8L, 5.3L and 6.0L engines

    793398d.gif
    Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines without A/C

    b701ba4.gif
    Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines with A/C

    a8d5a93.gif
    Accessory serpentine belt routing—6.5L Diesel engines

    7f5d3cb.gif
    Accessory serpentine belt routing—7.4L engine

    10dba31.gif
    Accessory serpentine belt routing—8.1L engine

    Oct 22, 2009 | 2004 Chevrolet Express

    2 Answers

    Need to replace alternator in a 1989 chevy s10 blazer


    With a serpentine belt, there is a tensioner pulley, so use a socket on a breaker arm placed on the bolt of the tensioner. Turn it until the belt goes slack. It helps to get someone else to hold that in place while you remove the alternator.

    Both serpentine and V-belt are described here, and there are diagrams :
    http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528003d76c

    Dec 31, 2008 | 1989 Chevrolet S-10 Blazer

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,914 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8984 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...