Question about 1998 Mitsubishi Montero Sport
My light doesnt blink nothing
How do I disarm my factory alarm on my 2000 Montero sport
Posted on Oct 26, 2013
THE FUSE IS LOCATED UNDER DRIVERSIDE DASH IN HARNESS TO ALARM
Posted on Aug 19, 2012
SOURCE: Warning light for 4-wheel drive
I had this problem on my 1995 Montero. The 4-wheel-drive indicator lights wouldn't stop blinking when I switched from 4-wheel drive to 2-wheel drive. It turns out that I had a slow leak in one of the front tires. After I fixed the leak and made sure the pressure was the same in both front tires, the problem went away.
This made sense to me because if one tire is much lower in pressure, it's closer to the ground, i.e. has a smaller radius, and therefore rotates more quickly. The manual says to drive in a straight line when disengaging 4-wheel drive but with the lower tire pressure on one side it was the equivalent of driving in a circle.
You could try checking your tire pressures and see if that makes a difference. Hope this helps.
Posted on Sep 17, 2008
NO. it uses the same fuse as the tail lights. If the tail lights are working th efuse is good. The bulb is most likely burned out.
Posted on Dec 16, 2009
Check the rest of the fuses. Most of the time, the audio cuircut is divided or supported by two fueses,. Not nessesaraly marked as radio, so look all of them., If avalible use a test light , W/ key in the on Postison, .
Posted on Jul 30, 2009
Tips for a great answer:
Apr 01, 2014 | 2005 Jeep Liberty
May 16, 2013 | 1999 Buick LeSabre Custom
Dec 02, 2017 | 1996 Pontiac Sunfire
Mar 07, 2011 | 2010 Volkswagen Jetta
Aug 28, 2017 | 1998 Ford Mustang
Aug 18, 2009 | 2006 Ford F-150
Jan 09, 2009 | 1997 Honda Civic
Dec 04, 2008 | 1988 Jeep Wrangler
2,346 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: