Question about 2005 Infiniti FX35
Could it be a problem with at door?
It is entirely possible that the unlock button on the remote is worn such that it is not making contact. I've seen this happen many times, as the unlock button is pressed so much more than lock. You might try to reprogram the remote first before you look into getting a new remote. The procedure goes like this.
Close and lock all doors
Key in and out of the ignition 6 times, hazard lights should flash twice
Turn key into accessory or on position
Unlock and lock doors with drivers switch
Press lock or unlock on remote
Hazards should flash again to verify recognition
turn key off
manually unlock door and then open and shut it.
you should then be able to test remote.
The key to the procedure is doing step two quickly Hope this helps, if not you may need another remote or see dealer.
Posted on May 07, 2009
I am relatively certain this has to be done at the dealer with the handheld diagnostic computer. They will have to access the Body Control Module and reset it. There are many options in the BCM menu that can be set. They should be able to do that rather quickly right on the service drive, and they shouldn't charge you since the vehicle is under warranty. If they don't then that is pretty ****. I worked for an Infiniti dealer for many years in the midwest and we gladly did things like that all the time for free just to take care of our customers.
Posted on May 05, 2009
the solenoid on that door is either shot or something wrong with the wiring..possible it has a fuse for each door but doubtful
Posted on Jun 21, 2009
Tips for a great answer:
Mar 11, 2013 | Cars & Trucks
Jul 05, 2017 | Cars & Trucks
Aug 21, 2012 | 2003 Infiniti FX35
Sep 20, 2011 | 2006 Toyota RAV4
Aug 09, 2011 | 2005 GMC Yukon
May 23, 2011 | 2005 Nissan Murano
Oct 27, 2010 | Infiniti QX4 Cars & Trucks
Feb 20, 2010 | 2004 Infiniti FX35
Feb 22, 2009 | 2004 Infiniti FX35
500 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: