Cars & Trucks Logo

Related Topics:

Anonymous Posted on Aug 13, 2012

Location of the blower motor resistor on 08 Nissan Sentra

Replacing the blower motor and cant find resistor

5 Related Answers

Anonymous

  • 783 Answers
  • Posted on Feb 05, 2009

SOURCE: Location of blower motor switch resistor on 2004 Grand Marquis

The blower speed controller is located under the hood on the right or passenger side on the heater housing just to the side of the heater hoses near the very back of the right cylinder head.
Yes that would cause the concern you are having.

Ad

Anonymous

  • 82 Answers
  • Posted on Apr 19, 2009

SOURCE: AC blower motor resistor Nissan Maxima 2000

yeh its located under the passenger side glove box,its in the heater box beside the heater motor ,,2 scews hold it in and it looks like a credit card when its out,,,,

Robert Debison

  • 412 Answers
  • Posted on Jun 12, 2009

SOURCE: help with location and replacing blower motor resistor

depends on what year van..1996-2000,located in engine compartment just above right strut tower at firewall..2001-2007..located behind glove box

Anonymous

  • 1 Answer
  • Posted on Feb 01, 2009

SOURCE: locating heater blower motor resistor

the resistor is behind your glove box. open the box and push in the sides to release it and let it hang down...the resistor is right there. I didn't try to replace it, a friend did it, but the part was under $20.

Anonymous

  • 3533 Answers
  • Posted on Feb 14, 2009

SOURCE: 03 Santa Fe blower motor resistor replacement

the part you need to replace is the blower motor resistor assembly it has a screw on each side of it with a plug in th middle and for the most part it is on the passanger under the dash behind a black cover stop by a auto store and take a look at one and then you know what you are looking for and at the same time you can find out how much its going to cost i am only going to guess it somewhere around $15.00 to 25.00 dollars.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Nissan Sentra 2010 blower resistor location? Is there an easy way to get at it without removing the entire dash?

if it has blower resistors in a pack , they will be in the blower case to be cooled with blower air
it has a modular control talk with a service center as to where it is and how to get it out
0helpful
1answer

How do I replace a blower resistor in a 2002 Nissan Sentra GXE?

Right next to the blower motor is the resister beneath the glove box,just remove connector,then 2 screws,can't tell by looking at it if it's bad,here's a link to what it look's like. Duralast Heater Blower Motor Resistor JA1625 2002 Nissan Datsun Sentra...
0helpful
1answer

Trying to locate the blower motar resistor on a 2012 nissan sentra

the resistor is below the glove box. remove glove box, and you will see the blower motor. resistor is beside the blower motor. it only has a couple of screws.if you think you can get to it without removing glove box. this is fine.the resistor has about 4 wires going to it. good-day!
0helpful
1answer

My turns signals and Heater blower just went out completely - Cabin fuses look OK - Suspect fusible link in engine compartment fuse box

Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

3helpful
1answer

The heating switch( fan) works only on #4 position , how can I fix it ?

replace blower motor resistor located next to blower motor under passenger side of dash.has one connector and two phillips screws securing it.easy to do and part is fairly inexpensive.if replacement part fails i would recommend replacing blower motor also asit is probably drawing too much current and overheating resistor assembly.
1helpful
1answer

Nissan Sentra 2001 Heater Blower motor only works on High speed no other settings; bought the resistor to replace, but cannot find where is the location, how to access;

Replacement resistor goes in heater box under Passengers side dash close to floor grab a manual best 20 bucks you can invest.Have to remove a panel or two and maybe the glovebox.
1helpful
1answer

My 1995 Nissan Sentra heater fan only worked on high, so I replaced the blower motor resister and now it only works on the first 3 settings. Any idea why?

did you install the right resistor, or the resistor is defective, many problems with aftermarket resistors, try a dealer resistor.
6helpful
1answer

The heater blower in my 2002 sentra is only woking when on the highest setting...do you know what the problem could be?

The blower resistors have gone bad and needs to be replaced.

The 2002 Nissan Sentra blower motor resistor is located near the blower motor itself, which can be found under the dashboard, on the passenger side of the car.

To access it, you have to remove the glove compartment and the isolation panel that covers the bottom of the blower. Do the following steps:

  1. first, locate and open the glove compartment on the passenger side;
  2. remove the four upper screws and slide the door lock bracket out;
  3. pull out the two pins at the inner bottom corners of the compartment;
  4. take out the glove compartment assembly;
  5. remove the two screws retaining the isolation panel and slide the later out.
Looking under the dashboard, you can now see the blower motor and, on its left side, near the firewall, the resistor block brown connector.

To take out the blower motor resistor:
  1. remove the white plastic bracket that faces it;
  2. unplug the brown connector;
  3. remove the two screws on the resistor's socket;
  4. pull the resistor block out.
The resistor block is actually a PCB ("Printed Circuit Board"). The traces printed on this board have different electrical resistance, and are used by the control assembly to vary the speed of the blower fan.

I believe Auto Zone or Parts Source has the blower resistor you need. Good luck

Not finding what you are looking for?

2,331 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...