2007 Mercedes-Benz ML320 CDI Logo

Related Topics:

A
Anonymous Posted on Aug 12, 2012
Be the first to answer

Mercedes ml350 stuck in park position. light says drive to nearest service station

Answer This Question

5 Related Answers

Anonymous

  • 710 Answers
  • Posted on May 02, 2009

SOURCE: engine oil light came on, on my mercedes ML 350, 2006 model.

IT MEANS THAT YOUR OIL LEVEL IS VERY LOW AND NEEDS TO BE FILLED. CHECK THE OIL LEVEL WITH THE DIPSTICK IF EQUIPPED. IF NOT, THEN ADD 1 OR 2 QUARTS OF OIL TO SEE IF THE OIL LIGHT GOES OFF. IT MAY TAKE SYNTHETIC OIL SO DON'T PUT CONVENTIONAL OIL IN IT IF YOU SEE A MOBIL 1 SYNTHETIC OIL RECOMMENDATION STICKER UNDER THE HOOD. IF YOU ARE UNSURE THEN BRING IT TO A QUALIFIED TECHNICIAN A.S.A.P.. HOPE THIS HELPS. GOOD LUCK.

Ad

Anonymous

  • 167 Answers
  • Posted on Jun 28, 2009

SOURCE: reset a service light 2003 ml350

Switch ignition on and immediately press the button to the bottom left of the speedo (trip reset type button) TWICE !!
Switch Ignition off
Press and hold same button while switching ignition on.
After 10 seconds a new interval will display followed by a beep.
Release the button and switch ignition off.
All done.

leedavidian

Auto Repair Help

  • 1420 Answers
  • Posted on Nov 03, 2010

SOURCE: reset service code B mercedes

Welcome to FIxYa.com


Reset Service Indicator
1. Insert key into ignition, switch to position "1". The mileage counter has to be
displayed.
2. Press repeatedly until the TRIP option is highlighted.
3. Press and hold and within 1 second press and hold both for 5
seconds. The shop menu is displayed.
4. Press repeatedly until "Assyst Plus" is highlighted and confirm with .
Options "Service Data" and "Full Service" are displayed.
5. Press until "Full Service" is highlighted. Confirm with .
6. Press until "Conf. Full Serv." is highlighted, confirm with . The display
shows "Service carried out?."
7. Press to select "Yes". Confirm with . "Cannot be undone" displays.
8. Press until "Confirm" is highlighted. Confirm by pressing . The display
reads "Full Service carried out".
9. Confirm by pressing .
MB

Regards, Lee Davidian

Thank you for using FixYa.com

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jun 18, 2011

SOURCE: how to reset the service

according to my alldata book a 2007 model can only be reset by the dealer ,but look on some of the chinese automotive software sites on the web as no doubt they may have cracked it and produced a small unit to clear the service inspection light by now

Anonymous

  • 62 Answers
  • Posted on Jun 30, 2011

SOURCE: i have 2006 mercedes ml350

you have a {tps} throttle position sensor problem

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

P0705 code on 2005 MB ML350
Possible causes Faulty Park/Neutral Position Switch Misadjusted Park/Neutral Position Switch Park/Neutral Position Switch harness is open or shorted Park/Neutral Position Switch circuit poor electrical connection What does this mean? When is the code detected? The transmission range switch detects the selector lever position and sends a signal to the TCM. Possible symptoms Engine Light ON (or Service Engine Soon Warning Light) P0705 MERCEDES-BENZ Description The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).
Read full answer
Jul 13, 2017 • Mercedes-Benz Cars & Trucks
0helpful
1answer

Rear drivers side seat is stuck down on my Mercedes 2004 ml350, how can I get it to release and come up
there is a cable that runs from outer handle on the seat and connects to a rotating tube/latch at the inner seat frame. you will need to use a long flat scew driver from behind that part of he seat to slip in theat latch and twist to unlatch that seat then you canr repair the cable.
Read full answer
Mar 01, 2015 • 2004 Mercedes-Benz Mercedes Benz S Class
0helpful
1answer

How do I reset the service light on 2012 mercedes ml350 keyless
you cannot its a dealer only thing I have the same issue it costs around 30 pound for them to reset it some times you can buy reset tools from ebay cheap but don't always work
Read full answer
Mar 18, 2013 • 2012 Mercedes-Benz M-Class ML350 BlueTEC...
0helpful
1answer

Just bought a 2006 mercedes ML350 and as I was driving, the engine oil light came on and said to check it at the next refeuling. I figured out that the oil level was low so I add some oil. My question why...
all mercedes engines are designed to burn a little oil its normal for them to use a litre ever 3 months or so thats how they get the engines to last as long as they do i have a mercedes c180 and been told of merc that that is normal but if you drive it like a loon it will burn more but as stated above its normal
Read full answer
Oct 25, 2012 • 2007 Mercedes-Benz ML350
0helpful
1answer

2007 MERCEDES ML 350 Park Light
have you checked for power to the bulb holder?
Read full answer
Apr 29, 2012 • 2007 Mercedes-Benz ML350
0helpful
1answer

Brake lights on mb ml350 don't work even after installing new bulbs
Rick,
The brake lamps on your Mercedes are computer-controlled. I would recommend scanning your computer network for possible fault codes.
Read full answer
Nov 18, 2011 • 2007 Mercedes-Benz ML350
1helpful
1answer

How to reset the service reminder on 2007 mercedes benz ml350
according to my alldata book a 2007 model can only be reset by the dealer ,but look on some of the chinese automotive software sites on the web as no doubt they may have cracked it and produced a small unit to clear the service inspection light by now
Read full answer
Jun 18, 2011 • 2007 Mercedes-Benz ML350
19helpful
1answer

Reset a service light 2003 ml350
Switch ignition on and immediately press the button to the bottom left of the speedo (trip reset type button) TWICE !!
Switch Ignition off
Press and hold same button while switching ignition on.
After 10 seconds a new interval will display followed by a beep.
Release the button and switch ignition off.
All done.
Read full answer
Jun 28, 2009 • 2007 Mercedes-Benz ML350
22helpful
1answer

How do I reset the service C on a ML350
Turn key to position 2. press the button to show the service due light. release button. turn key off. press and hold the same button to view the service light, within 2 second turn key to position 2. wait up to 10 second and the light will reset to show new service. This may take a couple of trys (make sure the doors are shut).
Read full answer
Jun 13, 2009 • 2007 Mercedes-Benz ML350
2helpful
2answers

How do u reset brake service indicater after brake service on 2006 ML350
this needs to be done by a mercedes dealership/garage
Read full answer
Jun 06, 2009 • 2007 Mercedes-Benz ML350
Not finding what you are looking for?

View Most Popular

2007 ML320 CDI

  • Cars & Trucks

Related Question

P0705 code on 2005 MB ML350

  • Mercedes-Benz Cars & Trucks

578 views

Ask a Question

Usually answered in minutes!

Popular Questions

Resetting Radio with WAIT on an 01' Ml 320

2007 Mercedes-Benz ML320 CDI

Mercedes key fob wont lock the doors.might have a

2007 Mercedes-Benz ML320 CDI

How to reset srs light

2007 Mercedes-Benz ML320 CDI

Fuse box chart for ml 320 cdi

2007 Mercedes-Benz ML320 CDI

Brake lights stay on

2007 Mercedes-Benz ML320 CDI

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2007 ML320 CDI Manual

2007 ML320 CDI

Loading...