Question about Isuzu Cars & Trucks

1 Answer

I have a 1999 isuzu hombre truck gauges quit workong

Checked fuses nothing wrong replaced fuses anyway

Posted by artcongdon on

Ad

1 Answer

alan

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 4 Answers

My Isuzu Wizard lost all its indicators and hazard lights fuses all checked out good Problem found to be someone in the past replaced a fuse with a higher amperage fuse trailer fault blew the relays instead of just the fuses

Posted on Aug 13, 2012

Ad

5 Related Answers

ginko

Ginko

  • 19396 Answers

SOURCE: 1998 isuzu hombre 4X4 4.3 shift hard

You need to check oil in gearbox

Posted on May 18, 2008

Ad

rblack_51

  • 3 Answers

SOURCE: fuel guage quit

the sender unit in the fuel tank has given up the ghost ,replace unit

Posted on Dec 02, 2008

Anonymous

  • 1 Answer

SOURCE: 97 isuzu hombre cylinder 2 misfire

1998 isuzu rodeo wont start no spark,no injector pulse

Posted on Jan 24, 2009

Anonymous

  • 11 Answers

SOURCE: isuzu hombre check engine light

after you did that did you hook it to a car computer to reset the lite? most need this and you can go to a auto zone and rent the computer for free just a deposit and then you get that back. the computer will do it almost for you.

Posted on Feb 16, 2009

michigan man

edgar walker

  • 3533 Answers

SOURCE: Isuzu 96 hombre,how to change the altenator

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 Isuzu hombre odometer not working how to fix???? Asap


if the speedo works, and odometer not then the odometer is bad.
what is VIN/ in what country, so i can look this up.
1999 are transitional year, in USA fed laws on this changed.

on old cars, the speedo cable ran both . so if one dies only
that which died is bad.
in later years, the speedo is run by ECU, from VSS inputs
and obometer is digital and stored in the ECU. (or BCM)
and the cluster is just a digital display and if its dead , then it is dead. this display.
one even newer cars, comm errors on CAN-buss can cause this.
2004 up. but you dont have this bus.
did you scan it first and check all fuses.>?
scan it to see that VSS is wrong, by live data stream, or DTC error, driving for VSS dead.
ill not post details lacking country , as other countries laws vary on ODOMETER TYPES> big time.

Mar 24, 2015 | 1999 Isuzu Hombre

1 Answer

I want isuzu hombre 1999 bcm wiring dirgram and color code


rooting?
BCM, the body cont. module?

what country, cars are made by country and are wired by laws for their country. and what engine option.?
what dont work right? just a clue to get in right page, would help 100%

if in uSA>
alldata.com has this. log in and look, or tell more....

Apr 30, 2014 | 1999 Isuzu Hombre

2 Answers

Air bag light on


Young boys will do that.lol. crossed a wire somewhere.

Apr 13, 2014 | 1999 Isuzu Hombre

1 Answer

Fuel gauge not working


Check your grounds just soubds like a faulty ground

Apr 23, 2012 | 1996 Isuzu Hombre

2 Answers

Turn indicators quit working


check the bulb first. if not try the fuse. Last would be the wiring.

May 04, 2011 | 1996 Isuzu Hombre

1 Answer

Just bought 99 Hombre. My clutch pedal dose not work right


yes you can adjust the clutch unless it is already adjusted as far as it can be then you may have to replace it

Aug 30, 2009 | 1999 Isuzu Hombre

1 Answer

Not Starting


This could be a bad battery, wiring problem, neutral safety switch or ignition switch. Check wire going into neutral saftey switch for voltage while in crank position. If you have voltage replace neutral saftey switch if not replace ignition switch. Thank you and make sure to rate me. Thanks

Jun 08, 2009 | 1999 Isuzu Hombre

2 Answers

1998 isuzu hombre 4X4 4.3 shift hard


Excessive throttle pressure can cause this. Input to the trans is controlled by the computer, but influenced by speed sensors and throttle position sensors. It could be in the valve body as well so you will want to get someone with proper equipment to check it. If you get an expensive estimate, get a second opinion.

May 18, 2008 | 1999 Isuzu Hombre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Mike

Level 3 Expert

4369 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...