2010 Chevrolet Equinox Logo

Related Topics:

Question about 2010 Chevrolet Equinox

1 Answer

Jeep patriot low tire pressure warning reset how???

Posted by Anonymous on

Check Price eBay

1 Answer

IAN HAYNES

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 288 Answers

Put the car in "on" position, but don't turn the key entirely. Try to look for a TPMS switch under the steering, once found, press and hold it until the TPMS light blinks thrice. Now, switch on the vehicle and wait for about 20 minutes - the sensor will restart, and the light should go away.

Posted on Mar 30, 2020

4 Related Answers

Anonymous

  • 10 Answers

SOURCE: Turn Off Low tire pressure warning!

with car not running! and ignition in the "on" position,push throttle pedal to the floor 3 times.this should reset all stored codes in computer.

Posted on Dec 17, 2008

Anonymous

  • 111 Answers

SOURCE: low tire pressure light is on all tire pressure is

Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Posted on Feb 28, 2009

Anonymous

  • 114 Answers

SOURCE: 2008 uplander how do i reset the tire pressure

there are 2 options one with a scanner and the other with the tool that you have to place at each tire.

Posted on Mar 26, 2009

Brian Anderson

  • 399 Answers

SOURCE: RESET THE LOW TIRE PRESSURE LIGHT AND UNLOCK A RADIO?

Take the radio to your GM dealer and go to the service department. They will be able to figure out the unlock code in less then 5 minutes and, at least when I had them do it, didn't charge me a dime.

Good Luck

Posted on Oct 08, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the reset button for low tire pressure on 2017 jeep patriot

no reset on tps when tire pressure is corrected resets automatically also if pressure good and no reset possible tps failure
0helpful
1answer

How to reset jeep patriot tire pressure low warning light

by filling the tires to the correct pressure if all tires are good then possible a tpi is faulty
0helpful
1answer

Jeep patriot 2016 low tire pressure light is on. My jeep does NOT have any tire pressure sensors. how do I reset the light ?

answered like 10,000 times here and over a million using google.
search much, ?
read the operators guide ever?
answer is , YOU CANT. (99.9% true)
nor can jeep (bound by laws)
your statement is not true it came with TPMS new
in the USA its the LAw.
So you are incorrect guessing, sorry , need link to fed law, have it.

drive to any tires store, in the USA? no country stated, so.... ?????
drive in , and tell them to put the sensors back (all 5)
if the cars wheel rims are non stock, oops, PIT FALL 2.
there is a tool you can buy,(i have one) that allows you to
turn it off.
Ill not teach that, (I take the 5th on that , like the hildabeast does )
I called the tool maker and they cant do 2016, yet.

sorry, ,next time dont buy car with warning lamps stuck on.
or cars hacked? yes, it's a new world now, Fed nanny lights.etc
GOOGLE TPMS , and read.
no lack of information here, or 12 long years now.
0helpful
1answer

Tyre pressure warning light showing when pressures are correct

Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You can re-initialize the system by following these steps:

1. Check and make sure that your tires are inflated to the correct pressure

2. Turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.

3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. Initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.
1helpful
1answer

Does the jeep pick up the pressure on the spare tire even though it is not on the vehicle? all the tires on my jeep have good pressure but I still have this spare low pressure warning.

Same problem here..." spare low pressure warning."
Even after put putting correct air in spare...warning goes away but then comes back after several months.

Let me know if/when you or anyone else finds a solution.

Thanks
0helpful
2answers

Overhead console warning

the air pressure in the spare tire is low add air to proper pressure and it will reset itself spare pressure low the perform service could also be for tire but check owners manual for reset service reminders or have scanned at an auto store sum,such as auto zone / advanced auto do it for free and can reset the code via scanner
2helpful
1answer

Changed right front tire now reads zero on dash light is on

Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.
4helpful
1answer

How do you reset low tire light

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.
5helpful
1answer

How do you reset a low tire pressure warning on a 2008 Jetta?

Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.
Not finding what you are looking for?

27,370 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22516 Answers

john h

Level 3 Expert

28824 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...