Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Aug 05, 2012

Headlight wiring diagram for 95 vs commodore

I need a wiring diagram for a vs commodore. my driving light is not getting full power and is dim when bypass wiring it gets full power and illuminates correctly please please help

2 Answers

Arnie Burke

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Holden Master 7,339 Answers
  • Posted on Oct 18, 2018
Arnie Burke
Holden Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 23, 2009
Answers
7339
Questions
0
Helped
1821394
Points
21459

Wiring gits old and resistent. Library sec629 has autoshop data

Damien John Dallas

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Oct 18, 2018
Damien John Dallas
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Oct 18, 2018
Answers
1
Questions
0
Helped
1876
Points
1

Low beam not working high beam OK relay's OK switch OK

Ad

5 Related Answers

Anonymous

  • 9 Answers
  • Posted on Oct 02, 2009

SOURCE: I have a Holden VS

hi mate i have the same problem with my vs statesman did you get yours fixed what was it?

Ad

Anonymous

  • 5 Answers
  • Posted on Jun 29, 2008

SOURCE: headlight wiring diagram 95 honda accord lx

Red/white is left high beam and red/yellow is left low beam. Red/orange is right high beam and red/green is right low beam.

Anonymous

  • 44 Answers
  • Posted on Jun 28, 2009

SOURCE: Vt Holden Commodore stereo wiring diagram

head down to your local auto store and you will be able to pick up a wiring harness adaptor. you wire your stereo to this adaptor then you simply plug it into the wiring loom. no damage to the loom so if you ever need to reinstall the standard stereo its just an unplug and plug back in. its extremely simple and colour coded so there are no mistakes.

stevenhurc

Steve Hurc

  • 459 Answers
  • Posted on Jul 07, 2009

SOURCE: VS 97 Commodore cuts out

more so the DFI module under the coils also swapp or change fuel pump relay with another relay in fuse box under bonnet in case relay issue the other relay to check by doing this is also the EFI MAIN relay near other relay. have seen these relays be overlooked many times.

Anonymous

  • 2 Answers
  • Posted on Jul 14, 2009

SOURCE: brake lights not working

I had the same problem, the brake light circuit runs through the column and through the turn signal switch and the contacts are most likely corroded. You will have to take the steering wheel off but be sure to disconnect the battery and let the car sit for 5min before taking the air bag out. Once you get the steering wheel off
you will take the screws out of the signal switch assembly, once done you will see two torks screws holding the switch cover on inside are the contacts. Clean the contacts with emory clothe and contact cleaner. The Cutlass series are notorious for this problem, you will need a friend to put the steering wheel locking plate back on because of the heavy spring load. I hope this fixes anybody with the same problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi I'm just wondering if anyone can help I've got a ve ss and I've lost all headlights and indicators but have brake lights and hazard light checked all fuses and can't find any that are blown

A 've ss' looks like it might be a Holden Commodore? All questions need FULL 'year make model' as first 3 words please.

It has a lot of fuses and the ones covering those are split up.

Holden Commodore (VE; 2006-2013) fuses and relays

Fuse Box Diagrams https://fuse-box.info > holden > holden-commodore-v...

Fuse Box Location. The fuse panel is located on the left side of the boot/cargo area, above the battery. Sedan:

..
0helpful
1answer

95 s10 2 2 liter. Headlights are dim no brights. Bought new sealed lights cleaned and checked grounds. Headlights will only come on after e brake releases. But all others come on when I turn key. I could...

As to headlights coming on when e brake released is normal pg 80 of owners manual as to problem usual culprits are the multi switch on column or harness damage -- if don't have an owners manual can observe or down load for free online it will give you all info on fuses and relays ---also can get a repair manual which would have the wire diagrams and specs for the truck or can try a dealer service Dept for a copy of elect diagram
1helpful
1answer

Need help.. I have a 95 vs commodore wagon. I have just replaced the right rear tail light bulbs. And it seems as everytime I put my foot on the brakes my headlights and cluster light comes on. After...

You have a bad ground, which people forget that you need voltage and ground for it to work. I would say you have a power wire connected to ground screwing with all the devices in that ground loop. Get a Hanes manual for your vehicle , it has the wire diagrams, troubleshooting guides and even sensor codes. Everything worked before you messed w the lite so unhook it and see what happens and possible check the polarity of the lite
0helpful
1answer

When switch headlamps from brite to dim they go out also drive light wont come on

First I would suspect the dimmer switch on the steering column or wiring in the column. Second I would suspect a bad ground wire or ground connection. Here is link to a forum where others are having lighting problems with daylight running lights. The whole DRL system is rather a complicated maze of relays and connections, any of which could cause your problem. The tip on the forum to get a wiring diagram form Autozone looks like a good deal.

Headlight Wiring Diagram 02 F250 DRL Ford Truck Enthusiasts Forums
0helpful
1answer

Wiring diagram for a 1994 olds cutlass supreme instrument lights

Power comes from headlamp / dimmer switch . Go here for free wiring diagrams http://bbbind.com/free_tsb.html Enter vehicle info year ,make , model ,engine size ! Under system click on lighting then under subsystem click interior light dimming .
0helpful
3answers

My Headlights are so dim that I cant drive at night in my 1997 Chevy Blazer. How Can I get them brighter?

You have to go back to the route cause & time
frame of the problem

Did you check voltage & ground at each lamp connector,
when they first got dim & you started to resolve things?

Why converter to a different bulb?
I don't know the current draw of the oe vs: the H4,but
that has to be considered

Obviously the alternator output would be up there at the
same time your checking lamp connector voltage.

Problem--Voltage Drop somewhere or too much resistance
somewhere,basic OHM's Law
1helpful
2answers

Vs ecotec vs commodore engine light comes on after driving

I have no dash lights so at night I can only use the speed set to let me know what speed im doing how do I fix them in 95 vs commodore
0helpful
1answer

Headlights only work on bright

i had this happen with my dodge ram 1500. the guy i bought it from put 350 dollar moon lit lights in with leds and they looked impressive but the issue was that they didnt go bright and i could only see 40 feet in front of me and i was sure taping led flashlights would have done me more good that those stupid headlights. then i had the idea of if the brights work and the dims dont then that means no electricity is getting to the dims so i decided to bridge the power from the bright headlight to the dims and it made all four work. now they all work, and only on bright. so im figuring there is a issue with the wiring in the truck. so this is a temporary solution if you really need just plain old lights like i did because i live out in the country
0helpful
1answer

Holden commodore VS wiring diagram

Can anyone help me I need to wire plug for computer for my dyno in a few weeks I have a vs v8 motor running in a hq I have vats removed and wired up what I had to to get her running. Now I need to wire computer plug up but can't find any info on this. Can anyone help ?
Not finding what you are looking for?

1,886 views

Ask a Question

Usually answered in minutes!

Top Holden Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...