How to disable door auto lock on 2010 Elantra

What exactly are you needing to know, you mention multiple problems.

Yes that can happen and your dealer can change the code for you if you ask him. But it will cost you.

Look in your manual for how to reprogram automatic door lock
hope it help

does this help? look in owners manual for how to turn "on or off" the auto lock feature.


Automatic Door Lock/Unlock
The automatic door unlock function is a vehicle personalization feature with the following 3?programmable modes of operation:
1. All: All of the doors will automatically unlock. 2. Driver: The driver's door will automatically unlock. 3. None: The doors will need to be unlocked by a door switch command or by pressing the the lock button on the RKE transmitter. The All or Driver modes may also be programmed as to when the automatic door unlocking will occur.
1. Key Off: The door(s) will unlock when the key is turned off. 2. Shift to Park: The door(s) will unlock when the vehicle is shifted into P (Park). The delay lock function may be enabled or disabled. When the function has been disabled, the doors will only lock by a door switch command or by pressing the the lock button on the RKE transmitter. When enabled, the doors will not lock until five seconds after the last door is closed.

Typically on autolock cars, when you pull the door handle to open it opens without having to unlock it. The auto lock is a safety feature. Some cars will auto-unlock when you stop, but most wont, you have to hit the unlock button. If yours doesn't auto unlock, the only way to change it would to be to install a switch somewhere on the shift mechanism, it would take a while to do.

This really doesn't help you much, but Hyundai has an awesome feature that won't let you lock your keys in the car. good if your forgetful

TSB 08-023-03. replace the lock cylinder switches.

You may have a bad master door swith assembly or more fuses out.

Not an easy fix! The door lock function was designed to lock doors only. you can however, disable this lock feature by simply cutting the light blue automatic door lock signal wire on the 6-wire harness plug connector located on the chime module (In component center).

the noise is the relay clicking for the shift lock release....the auto door lock setting needs to be turned on...it should tell you how in the owners manual...