Question about 2000 Land Rover Discovery
If your brake lights don't work Its because you blew the fuse which Is located In the main fuse panel under steering wheel. Without break lights your rover will fire up nice but wont shift out of park until you replace the fuse. If your ABS Is acting up It Is also an easy fix. Disconnect the ABS from each wheel. You still got all wheel disc breaks that work great but no ABS. Your other option is thousands of $$. If your breaks are weak check your master cylinder and make sure you got enough fluid and that you are not loosing the fluid. If you notice you are leaking brake fluid because you have to keep filling it up but cannot find a leak anywhere. I bet I know where It is. Check your rear break lines and make sure one of them didn't get caught in your rear springs and pinched ever so slightly when you were doing dounuts In the snow.
Posted on Mar 22, 2009
Had the same problem with my 03 Disco. Went through the usual, checking the fuses, etc. I went ahead and replaced my break light switch on the brake pedal. $15.00 fix, or I thought so; still had the problem! Took it in for repairs and found out it was fuses after all... To get the parking lock to disengage you need to pull of the housing, which is tough and then press in the locking pin at the base of the shift lever to shift out of park. you can do it with the engine running and it will drive just fine until you put it into park again. Check your brake lights if there is a problem. Could be a sign of the brake switch failure. In my case the lights were out, but a cheap trailer rental did the damage. The short in the trailer blew some fuses and it was a problem that cost me $60.00 at the repair shop....
Posted on Aug 27, 2009
SOURCE: abs light on in land rover
I have spent way too much money trying to get the 3 amigos to go out...ABS light, TC light and downhill descent. I have decided to try and ID the wires that go to those particular dash lights and cut them. I am tired of this ****. Landrover told me three different things that may cause this issue and told me to start with the least expensive one first! Go to hell, Landrover. I will NEVER buy another Landrover product. Which wires can I cut?
Posted on Oct 20, 2009
first check the abs sensors wiring and connections if good than have the truck scanned most auto stores such as auto zone/advanced auto will scan vehicle for free check ur local area the trouble code will narrow down ur problem so it can be repaired
Posted on Apr 09, 2010
Tips for a great answer:
Jun 17, 2015 | Cars & Trucks
Mar 30, 2014 | 2000 Land Rover Range Rover
Oct 06, 2012 | 1999 Land Rover Discovery
Oct 06, 2011 | 2006 Land Rover Range Rover
Jan 14, 2010 | 1998 Land Rover Discovery
Dec 24, 2009 | 1994 Land Rover Discovery
Aug 30, 2009 | 1995 Land Rover Range Rover
Aug 06, 2009 | 2000 Land Rover Discovery
Nov 15, 2008 | 1995 Land Rover Discovery
Oct 11, 2016 | 2000 Land Rover Discovery
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: