Does yuor truck has a hitch harness? check your towing lights controler sometimes behind L tail ligth, just follow your harness, back track power, don't know what you have done but hope this helps.
SOURCE: front brake rotors 1995 toyota 4runner
If you have 6 bolts going around the center (manual lock in/lock out) hub, you are going to be there a while. The center hub needs to come off, and ALL of the internal wheel bearings need to come out. The whole locking hub must be removed in order get the rotor off. This is NOT an easy job, and you need a special tool to loosen/tightem the wheel bearings. Figure 2 hrs per side if you have all of the proper tools & skill level.
SOURCE: 1998 4runner trailer light wiring not working
I recommend that you tighten the ground wire screw for starters. since the vehicle is ten years old corrosion may be the culprit.
SOURCE: 1990 toyota 4runner 4x4 wont lock in front wheels
your drive shaft thats turning is mabe broke or your automatic 4x4 lockers could be bad
SOURCE: How to fix a brake light
all lights must be working in order for the lights to work in some cars...it's possible that you may have a bad ground wire to the light socket or the you may not be getting power to that socket, which means you have a bad wire. Check to see if you're getting power to that socket with an electrical tester first.
SOURCE: 2003 toyota 4runner, no brake lights, will not
check you brake light fuse it the 10A stop fuse.
343 views
Usually answered in minutes!
i will try that. thank you
×