Cars & Trucks Logo
Anonymous Posted on Jul 24, 2012

1991 dodge ram van wont start

Have checked the battery, relay switch, starter and cables. it wouldnt start in park but it did start in neutral. now it wont start in any gear. it doesnt click in park but it does click in neutral. thats all it does. what is going on?

2 Answers

danoyachtcap

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Dodge Master 2,907 Answers
  • Posted on Apr 22, 2015
danoyachtcap
Dodge Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 17, 2011
Answers
2907
Questions
4
Helped
1274884
Points
52081

This procedure usually works:
·Check the battery cable connections:
Make sure the positive cable, makes a good connection at the battery and at the starter. Make sure the negative cable makes a good ground connection at the battery and (preferably) at the engine.

·Check the battery the simple way, like this:
Turn on the headlights, then try to start the car.If the headlights do not dim or go out, then the battery is likely ok.

·Check the starter and solenoid:
If the wiring looks ok, then look at the starter solenoid for a good connection, and proper voltage at the starter(10 volts minimum while cranking).
If the starter spins and no crank, the problem is most likely the Solenoid's bendix gear is stuck.
Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck bendix gear.
·Make a simple test of the alternator:
If you can, somehow get the engine running, measure the voltage at the battery. It should be at least 13.6 volts to properly charge the battery.

Stephen

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Dodge Master 21,873 Answers
  • Posted on Jul 24, 2012
 Stephen
Dodge Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 22, 2012
Answers
21873
Questions
0
Helped
6203202
Points
67230

To clarify - the engine cranks then starts.
If it won't crank in any gear, I would check the neutral safety switch first.
You can also jumper the starter solenoid to make sure the starter will crank the engine manually without the circuit from the key switch.

Ad

1 Related Answer

Anonymous

  • 3 Answers
  • Posted on Nov 16, 2008

SOURCE: 1991 dodge ram 250 van 318 engine won't start

ALWAYS CHECK THE GROUND ON A DODGE

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1999 dodge ram van 3500 starter engages while engine is running only in park or neutral. Had to pull starter relay to disengage starter, also starter relay somehow connected to blower motor high speed

Check ignition key switch wiring. Could be a short between blower motor wiring and starter wiring. Try switching on high speed blower when ignition is on only (not started). If the starter cranks, then there is surely a leakage/short in the wiring.
3helpful
1answer

Car will not start starter checked out good what else can I check

The battery. Now if the car does not even crank and the starter is good, then I would recommend checking some fuses and relays. Some fuses to check would be the ignition, start, etc. For relays I would check the starter relay and the neutral start relay. I would also check neutral park switch on the transmission. If the switch isnt working properly then the car wont start at all.
0helpful
1answer

How do you replace an ignition switch on a 2002 chevy venture van? I have a 2002 chevy venture van and have had a problem with the starter staying engaged. I replaced the started and it fixed it...

So what it only does it in park or neutral ! The vehicle starting circuit is only suppose to let it start in park or neutal . Park neutral safety switch won't allow B+ voltage to S terminal on the starter solenoid unless the vehicle is in park or neutral . It's probably the starter relay contacts stuck closed . You really should learn how it works before guessing as to the problem . Plus learn automotive electrical testing ! The ignition switch when turned to the start position send's a voltage signal to the PCM - engine computer .The PCM will energize the starter relay to crank the engine . PCM / ABS 10amp fuse in the I/P fuse box supply's B+ voltage to the park / neutral safety switch . When in park or neutral the B+ voltage goes through the control side of the relay to the PCM which will supply a ground to energize the starter relay .
2helpful
2answers

My dodge ram van wont start no spark replace many parts

i know alot of crysler/dodges had a crank sensor i had 1 go out on mine check see if you got 1 chances are thats it when mine went out it would turn over but no spark
0helpful
4answers

I have a 1992 Dodge Ram Van 318 ci. It died while driving. No ignition, no check engine light, starter won't crank. Battery is good, cleaned posts, changed ignition switch. Still nothing, any ideas?

There is a starter solenoid between the battery and the starter. Check that to see if it has gone bad. It will not set a light. you can jumper from the power lead to the starter post to see if it engages. Be sure you are in neutral if this is a standard shift because you will be bypassing the neutral switch. The solenoid is on the firewall or well well depending on your options configuration.

Hope this helps
0helpful
2answers

1988 Dodge Ram 150 318 V-8 Will not start. Battery good. Cables good.Starter is good. Put key in and Nothing. No clicks, nothing. Does this truck come with a spark igniter? Could this be the problem? Where...

Greetings!

Let's keep things simple to start with... Check the battery that it has sufficient charge. (I did say to keep it simple). Ensure the gear selector is in Park or Neutral if equipped with an automatic trans, or depress the clutch pedal if equipped with a manual trans.

Lastly, in keeping things simple... check all the fuses and fuse links (special fusible wire) that power is available to your vehicle's electrical system.

With a test light, check the starter relay with the key in start position is energising the starter relay... bypass the starter relay if no power is present. if the starter operates, you now know the problem is located within the start control circuit (from the key switch through the starter relay to ground via a neutral safety switch (auto) or clutch switch (Manual).

finding the fault should be quick with a circuit diagram.

Cheers, Jay

0helpful
1answer

Caravan wont turn over and start

Transmission range sensor is what it is called .
0helpful
1answer

Wont start

There's only 2 more things that I can think of, check the fuse for the ignition, then the computor itself, you did everything else.It might be the problem and may not.
0helpful
1answer

2000 Dodge Ram 5.9L with A/T will not start

Hello,
Could it be the inhibitor switch on the box, it is the only one you havn't sorted/ replaced?
Fixya'd
Paul 'W'
Onyer~EDson(:0)~[><U.K.
1helpful
2answers
Not finding what you are looking for?

664 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...